Only One Cable – Send audio and video, while passing Ethernet signals and power over one twisted pair cable
Multi-Format Analog Port and HDMI Port – Supports legacy analog signals - RGBHV, Component, S-Video, and Composite, and digital HDMI/HDCP, DisplayPort++ and DVI signals
Send HDMI signals up to 100 meters – Extend the reach of the HDMI signals far beyond the capabilities of typical HDMI cabling
Standard Twisted Pair Cable – Save time and effort in installation by leveraging cost effective twisted pair cable, see the Cabling for Success with DXLink white paper for more details
Power over DXLink Enabled – Designed for use with Enova DGX or DVX systems with DXLink inputs, PS-POE-AT-TC (FG423-84) or PDXL-2 (FG1090-170) to provide remotely located Power over DXLink (requires firmware v1.2.40 or above)
OVERVIEW
The DXLink Multi-Format Wallplate Transmitter sends analog or digital video including HDMI/HDCP, along with embedded audio or supplemental analog audio up to 100 meters to an Enova DGX Digital Media Switcher, compatible Enova DVX All-In-One Presentation Switcher, or directly to a DXLink Receiver. It receives Power over DXLink* from the Enova DGX, Enova DVX (3155HD, 3156HD or 2155HD), PS-POE-AT-TC High Power PoE Injector or PDXL-2 Dual Power over DXLink Controller over the twisted pair cable and features both a multi-format analog port to support legacy devices and an HDMI port to support newer digital devices.
COMMON APPLICATIONS
Mount the DXLink Multi-Format Wallplate Transmitter in the wall or lectern to connect guest equipment and send audio and video signals across the room, on the other side of the house or in a classroom down the hall. Since it is powered remotely, the wallplate can be installed virtually anywhere.
* Power must be supplied by one of the following DXLink Power sourcing devices: Enova DGX 8/16/32/64 Digital Media Switcher (with a DXLink Twisted Pair Input Board installed), Compatible Enova DVX All-In-One Presentation Switcher (3155HD, 3156HD or 2155HD), PS-POE-AT-TC High Power PoE Injector or PDXL-2 Power over DXLink Controller. AMX only supports the use of these approved Power over DXLink solutions. Other third party power supplies or non-compatible standard PoE solutions may damage the DXLink equipment.
Only One Cable – Send audio and video, while passing Ethernet signals and power over one twisted pair cable
Multi-Format Analog Port and HDMI Port – Supports legacy analog signals - RGBHV, Component, S-Video, and Composite, and digital HDMI/HDCP, DisplayPort++ and DVI signals
Send HDMI signals up to 100 meters – Extend the reach of the HDMI signals far beyond the capabilities of typical HDMI cabling
Standard Twisted Pair Cable – Save time and effort in installation by leveraging cost effective twisted pair cable, see the Cabling for Success with DXLink white paper for more details
Power over DXLink Enabled – Designed for use with Enova DGX or DVX systems with DXLink inputs, PS-POE-AT-TC (FG423-84) or PDXL-2 (FG1090-170) to provide remotely located Power over DXLink (requires firmware v1.2.40 or above)
DXLink Direct Connection – When receiving Power over DXLink
from the PS-POE-AT-TC or PDXL-2, DXLink Wallplates can be connected directly to a DXLink Receiver for a point-to-point solution
Note:
Power must be supplied by one of the following DXLink Power sourcing devices:
Enova DGX 8/16/32/64 Digital Media Switcher (with a DXLink Twisted Pair Input Board installed), Compatible Enova DVX All-In-One Presentation Switcher (3155HD, 3156HD or 2155HD), PS-POE-AT-TC High Power PoE Injector or PDXL-2 Power over DXLink Controller.
AMX only supports the use of these approved Power over DXLink solutions. Other third party power supplies or non-compatible standard PoE solutions may damage the DXLink equipment
Receiver/Transmitter Cable Type - Twisted Pair
Receiver/Transmitter Format Type - DVI
Receiver/Transmitter Format Type - HDMI
ROHS Compliant - Yes
Supported Resolution - 1080i (1920x1080)
Supported Resolution - 1080p (1920x1080)
Supported Resolution - 720p (1280x720)
Warranty - Yes
Spec Sheet available - Yes
Depth:
1.31 in
Height:
4.69 in
Width:
6 in
Shipping Weight:
2.20 lbs
Regulatory Compliance:
WEEE, HDCP
Product Weight:
1.40 lbs
Warranty (Length/Type):
3 Years Limited
Certifications:
CE, FCC, UL
Input Impedance (Audio):
10000 ohm
Operating Temperature (Maximum):
104 F
Operating Temperature (Minimum):
32 F
General:
Compatible AMX Products
Enova DGX 8/16/32/64 Digital Media Switchers
Enova DVX-3155HD, DVX-2156HD and DVX-2155HD All-In-One Presentation Switchers
AVB-RX-DXLINK-HDMI DXLink HDMI Receiver Module as a point-to-point solution (when Wallplates are powered by PS-POE-AT-TC or PDXL-2)
PS-POE-AT-TC High Power PoE Injector
PDXL-2 Power over DXLink Controller
CC-USB, USB Programming Cable (FG10-5965)
Airflow: Natural convection via air vent openings on front, back and top
MTBF: 381,000 hours
Transport Layer Throughput (Max): 10.2 Gbps
Twisted Pair Cable Type: Shielded Cat6, Cat6A and Cat7
DXLink twisted pair cable runs for DXLink equipment shall only be run within a common building where a common building is defined as: the walls of the structure(s) are physically connected and the structure(s) share a single ground reference
Twisted Pair Cable Length: Up to 328 ft (100 m)
ACTIVE POWER REQUIREMENTS:
DXLink Power:
Power must be supplied by a DXLink Power sourcing device such as:
Enova DGX 8/16/32/64 Digital Media Switcher (with a DXLink Twisted Pair Input Board installed)
Compatible Enova DVX All-In-One Presentation Switcher (3155HD, 3156HD or 2155HD)
PS-POE-AT-TC High Power PoE Injector
PDXL-2 Power over DXLink Controller
When installed in conjunction with an Enova DGX use the Enova DGX Configuration Tool located at AMX.com/enova to determine the power requirements of the configuration
AMX only supports the use of these approved Power over DXLink solutions. Other third party power supplies or non-compatible standard PoE solutions may damage the DXLink equipment. To use PS-POE-AT-TC or PDXL-2 as a power source the wallplates require firmware v1.2.40 or above.
Power Connector: Included on DXLink Connection
Power Consumption (Max): Power over DXLink Supplied 7 W
Power Supply:
External, Required:
Power must be supplied by a DXLink Power sourcing device such as:
Enova DGX 8/16/32/64 Digital Media Switcher (with a DXLink Twisted Pair Input Board installed)
Compatible Enova DVX All-In-One Presentation Switcher (DVX-3155HD, DVX-3156HD or DVX-2155HD)
PS-POE-AT-TC High Power PoE Injector
PDXL-2 Power over DXLink Controller
AMX only supports the use of these approved Power over DXLink solutions. Other third party power supplies or non-compatible standard PoE solutions may damage the DXLink equipment.To use PS-POE-AT-TC or PDXL-2 as a power source the wallplates require firmware v1.2.40 or above
Environmental:
Temperature (Storage): -22° to 158° F (-30° to 70° C)
Humidity (Operating): 5% to 85% RH (non-condensing)
Humidity (Storage): 0% to 90% RH (non-condensing)
Heat Dissipation (Max): Power over DXLink supplied: 24 BTU/HR
Front Connectors:
HDMI Input: HDMI Type A Female
Analog Video Input: HD-15 (Breakout cable required for non RGB formats)
Analog Stereo Input: 3.5mm Mini-Stereo Jack
Advanced Configuration Interface: USB Mini-B Connector
USB (HID) Keyboard & Mouse: USB Mini-B Connector
SIDE CONNECTORS:
ID Pushbutton:
Toggle between DHCP and static IP addressing
Places system in NetLinx Device ID assignment mode
Reset the factory default settings
Restore the factory firmware image
Reset Pushbutton: Resets/reboots the CPU of the wallplate
Back Connectors:
DXLink Output:
RJ-45
CONTROL
Advanced Configuration Interface:
USB Mini-B Connector
Indicators:
Power Indicator:
Green indicates whether or not the module is powered on
USB (HID)
USB (HID):
(1) USB Mini A/B Connector (“HOST”)
Use in conjunction with an Enova DGX Digital Media Switcher, connect a DXLink TX (twisted pair or fiber) to a PC and emulate keyboard and mouse commands from a DXLink Fiber Receiver (twisted pair or fiber)
For a list of HID devices which have been tested and found to be working well with the latest firmware please view the document “DXLink HID Keyboard and Mouse Supported Devices”.
HDMI:
Compatible Formats: HDMI, HDCP, DVI
Input Signal Type:
HDMI
DVI-D (Single Link With Cable Adapter)
DisplayPort ++ (Input Only, With HDMI Cable Adapter)
Input Connector: HDMI Type A Female
Propagation Delay (Typ): 5 us
Input Voltage (Nominal): 1.0 Vpp Differential
Input Re-clocking (CDR): Yes
Input Equalization: Yes, Adaptive
Data Rate (Max): 4.95 Gbps / 6.75 Gbps
6.75 Gbps supported when the DXLink HDMI RX Scaler is in Bypass mode and format is 1080p60 or less
Pixel Clock (Max):
165 MHz / 225 MHz
225 MHz supported when the DXLink HDMI RX Scaler is in Bypass mode and format is 1080p60 or less
Progressive Resolution Support: 480p up to 1920x1200 @ 60 Hz including but not limited to those resolutions shown in the DXLink Twisted Pair Transmitters/Receiver Instruction Manual
Interlaced Resolution Support: 480i, 576i, 1080i including but not limited to those resolutions shown in the DXLink Twisted Pair Transmitters/Receiver Instruction Manual. If input is interlaced, all scaled outputs will deinterlace video to a progressive resolution format. If in scaler Bypass mode interlaced input will pass through
Deep Color Support:
24-bit, 30-bit, 36-bit
30-bit, 36-bit supported when the DXLink HDMI RX Scaler is in Bypass mode and format is
1080p60 or less
Color Space Support:
RGB 4:4:4
YCbCr 4:4:4 and 4:2:2 (Input signal support for YCbCr 4:4:4 and 4:2:2, output color-space is converted to RGB 4:4:4)
3D Format Support:
Yes (HDMI Primary Formats)
Frame Packing 1080p up to 24Hz
Frame Packing 720p up to 50/60Hz
Frame Packing 1080i up to 50/60Hz
Top-Bottom 1080p up to 24Hz
Top-Bottom 720p up to 50/60Hz
Side-by-Side Half 1080p up to 50/60Hz
Side-by-Side Half 720p up to 50/60Hz
3D supported when the DXLink HDMI Rx
Scaler is in Bypass mode and format is 1080p60 or less
Audio Format Support: Dolby TrueHD, Dolby Digital, DTS-HD Master Audio, DTS, 2 CH through 8 CH L-PCM Dolby Digital and DTS support up to 48kHz, 5.1 channels
Yes, Supports AMX HDCP InstaGate Pro Technology When used with either an Enova DGX 8/16/32 Digital Media Switcher or DVX All-In-One Presentation Switcher the key support is up to 16 sinks per output, independent of source device
When used as a single point to point solution the key support is defined by the source device
DDC/EDID Support:
The HDMI EDID in point to point mode is passed up from the sink device.
When used with Enova DGX 8/16/32/64 Digital Media Switcher or Enova DVX-3155HD, DVX-3156HD or DVX-2155HD the HDMI EDID is passed from the Enova Switcher input to the TX and is user reprogrammable. The analog video input connection provides a fixed EDID set
Analog video:
Compatible Formats:
RGBHV, RGBs, RGsB
YPbPr (HDTV)
Y/c (S-Video), C (Composite)
Progressive Resolution Support: 480p up to 1920x1200 @ 60 Hz (reference the DXLink Twisted Pair Transmitters/Receiver Instruction Manual for extended list)
If input is interlaced, all scaled outputs will deinterlace video to a progressive resolution format. If in scaler Bypass mode interlaced input will pass through unaltered
Auto-Adjust Input: Supported
RGB Input Signal Level Range: 1 Vpp nominal
RGB Input Impedance: 75 ohms
HV Sync Input Signal Level Range: 2 to 5 Vpp
HV Sync Input Impedance: 2.5 pF Typ, 10 pF Max
Digital Processing: 24 bit, 165 MHz
Y/Pb/Pr Input Signal Level Range: 1.0 Vpp for Y, 700 mVpp for Pb Pr
Y/Pb/Pr Input Impedance: 75 ohms
Y/c (S-Video) Input Signal Level Range: 1.0 Vpp for Y, 1.0 Vpp for c
Y/c (S-Video) Input Impedance: 75 ohms
C (Composite) Input Signal Level Range: 1.0 Vpp
C (Composite) Input Impedance: 75 ohms
Input Connector: HD-15 (Breakout cable required for non RGBHV formats)
AUDIO (ANALOG & DIGITAL S/PDIF):
Input Signal Types:
Stereo Analog, S/PDIF
Video signal must be present to pass Audio
Analog Input Level (Max): +2 dBu, unbalanced
Analog Input Impedance: 10k ohms
Analog to Digital Conversion: 48 kHz Sample Rate, 24-bit
S/PDIF Audio Format Support:
Dolby Digital, DTS, 2 CH L-PCM
Dolby Digital and DTS support up to 48kHz, 5.1 channels