The RD-8C is a remote fader level control. Control your system from any location with our remote controls. RD-8C is a hard-wired desktop programmable remote fader controller for Ashly amps and processors that have DSP and a serial data connector. RW-8C is the wall-mount version. Using Protea NE Software, each fader is assigned to adjust the level of one or more input or output channels. A master fader controls the overall level of all faders.
On/Off switch with LED for each fader
Adjusts levels on single or combined input or output channels
Wire directly to host unit, no network required
Shipping weight: 2lbs (1kg)
Safety/compliance: CE, FCC, RoHS
Include:
nXp amplifiers
Pema amplifiers
NE multi-channel amplifiers
NE two-channel amplifiers
ne24.24M matrix processor
NE8800/4800/4400 network processors
Systems Controlled - Audio
Warranty - Yes
Spec Sheet available - Yes
Max Data Cable Length:
Up to 1000 ft using #24 gauge twisted
pair
Connections:
XLR male
Fader range:
+10 to -75 dB
Power Requirements:
Phantom Power from host unit
Warranty (Length/Type):
5 Years Limited
Depth:
1.60 in
Height:
3.40 in
Width:
7.30 in
Shipping Weight:
2 lbs
Product Weight:
1.40 lbs
Certifications:
CE, FCC
Operating Temperature (Maximum):
120.20 F
Operating Temperature (Minimum):
39.20 F
ne24.24M
- 24-channel Matrix Digital Signal Processor
ne4400
- 4 x 4 32-bit Network Digital Signal Processor
ne4800
- 4 x 8 32-bit Network Digital Signal Processor
ne8800
- 8 x 8 32-bit Network Digital Signal Processor
nXp1.52
- Network Power Amplifier with DSP: 2 x 1,500 Watts @ 2 Ohms 2 x 1,500 Watts @ 4 Ohms 2 x 1,500 Watts @ 70V
nXp1.54
- Network Power Amplifier with DSP: 4 x 1,500 Watts @ 2 Ohms 4 x 1,500 Watts @ 4 Ohms 4 x 1,500 Watts @ 70V
nXp3.02
- Network Power Amplifier with DSP: 2 x 3,000 Watts @ 2 Ohms 2 x 2,000 Watts @ 4 Ohms 2 x 2,450 Watts @ 70V
nXp3.04
- Network Power Amplifier with DSP: 4 x 3,000 Watts @ 2 Ohms 4 x 2,000 Watts @ 4 Ohms 4 x 2,450 Watts @ 70V
nXp4002
- Network Power Amplifier with DSP: 2 x 400 Watts @ 2 Ohms 2 x 400 Watts @ 4 Ohms 2 x 400 Watts @ 70V
nXp4004
- Network Power Amplifier with DSP: 4 x 400 Watts @ 2 Ohms 4 x 400 Watts @ 4 Ohms 4 x 400 Watts @ 70V
nXp8002
- Network Power Amplifier with DSP: 2 x 800 Watts @ 2 Ohms 2 x 800 Watts @ 4 Ohms 2 x 800 Watts @ 70V
nXp8004
- Network Power Amplifier with DSP: 4 x 800 Watts @ 2 Ohms 4 x 800 Watts @ 4 Ohms 4 x 800 Watts @ 70V