The 100 Series Cabinets are 18-1/2" deep, 22-5/16"" wide, and available in five different RU heights, 21RU, 24RU, 35RU, 40RU and 44RU. The cabinets are welded 16 Gauge CRS and assembled for immediate use. Rear doors are hung with quick-release spring hinges which allow them to be rotated 180? for right- or left-hand opening. Rear door includes flush door handle and cylinder lock. See chart on back for appropriate Optional front door model numbers. If front door is ordered, it will be keyed differently than the rear door for security. The 100 Series Cabinet line offers several installer-friendly advantages, including a 6RU standard panel width opening in the cabinet top and conduit arrays. The top opening can be left open for wire access and/or ventilation, partially covered with the ISOPANEL™ for non-conductive cable access or closed using 2 standard 5-1?4" (3 RU) panels. Top opening is also perfect for installing EFP Series fan. Conduit arrays are located on the top and bottom surface panels, as well as the top and bottom back flanges. Flange arrays consist of five knockouts, three 1" (25 mm) standard, and two, 1?2" (13 mm) 3?4" (19 mm) concentric. Surface arrays are comprised of 4 knockouts: two 1" (25 mm) standard knockouts and two 1?2" (13 mm) 3?4" (19 mm) concentric. Stamped, perforated vents are located on front, sides and rear door to allow for maximum air convection. Cabinets include one pair of 12-gauge, CRS fixed mounting rails tapped 10-32 and recessed 5?8" (16 mm). Rails are standard E.I.A. spacing. Cabinet surface is phosphate pre-treated for proper paint adhesion. Standard finish is textured black epoxy #962.
UL 1678 Listed
Five model heights available
Locking rear door offers right- or left-hand hinging capability
Up to 6RU (or combinations to 6RU) panel opening in top offers
wiring convenience or fan panel cooling with optional EFP series
fan kits
Increased opening in base facilitates wiring to conduit or below
floor raceways
Functional 3RU blank panel (51/4") provided
Manufactured to E.I.A. standards
Includes perforated front, rear and side vents for heat dissipation
Pre-Drilled to accept M-1A cabinet mount IR repeater
21RU heights, 18 1/2" depth
Fixed rack rails
The best value in the industry
Base, top panel, side panels, and rear door, fully assembled
Welded 16-gauge cold rolled steel (CRS) construction
Vented top, base, sides, and rear door
One pair of 12-gauge, CRS fixed mounting rails with hash marks to
denote RU increments
Pre-Installed hardware for optional front door installation
18 Conduit Knockouts
Solid, perforated, or plexiglas front door
Drawers, shelves, fans, and accessories
RCK-18 caster kit
Lacing bars and bus bars
Rack Rails - Yes
Spec Sheet available - Yes
Height:
46 1/4" (117.475 cm)
Width:
220 5/16" (56.6674 cm)
Depth:
18 1/2" (46.99 cm)
Usable Depth:
17.03 in 433 mm
Rack Rails:
Yes
Rack Units (Available):
24
Depth:
18.50 in
Height:
46.25 in
Width:
22.31 in
UL Listed/Standard:
1678
Panel Space:
42 1/8 inch (1070 mm)
Top Opening:
6RU
MPFD21
- 1-inch Deep Micro Perf Door for 100, and 200 Series Racks 21RU
MPFD24
- 1-inch Deep Micro Perf Door for WMA, 100, and 200 Series Racks 24RU
MPFD24-3
- 3-inch Deep Micro Perf Door for WMA, 100, and 200 Series Racks 24RU
PFD24
- 1" Deep Plexiglass Door for 24RU WMA, 100, and 200 Series Racks
SFD24
- Solid Front Door for 24RU WMA, 100, and 200 Series Racks