The ASP-MG24TDB advances sound masking control including time based level control to a whole new level while providing the secondary benefit of loudspeaker processing for the most popular Atlas Sound loudspeaker systems.The ASP-MG24 is 1RU, 6 input x 4 output DSP configurable by a very intuitive set-up GUI.Four inputs are tied to independent white/pink noise generators with adjustable ramp-up to allow gradual acclimation to masking levels.Two additional inputs are available for mic or line sources to allow paging and/or music sources to be blended with the masking sources to any of the 4 outputs.Dedicated 1/3 octave filter sets are available for each of the 4 generator outputs, 8 band parametric EQ blocks along with dynamic control is available for each of the two mic/line inputs.Any mix of all 6 inputs may be easily matrixed to the 4 output DSP blocks for additional parametric equalization, delay, and limiting (if required).Factoring in all features, a very complex 4 zone sound masking system can be easily configured with 2 external music or page sources.The MGTDB internal module allows timing and level control of all 4 Masking inputs for daytime holiday and weekend scheduling.For loudspeaker control functionality, the ASP-MG24TDB may be configured in 2 input x 4 output mode for stereo full range.Other configurations include full range plus sub operation with Atlas Sound FAP ceiling speakers, SM series surface mount speakers, or AH series stadium horns for complete control of crossover types, equalization, delay, and dynamic control.Computer interface is simplified by USB, RS-232 and Ethernet connection (no hard to use USB to Serial adaptors required!).External UL listed international voltage power supply is included.
Two Mic / Line Balanced Inputs
Four Balanced Outputs
Four Independent Masking Generators
Pink or White Noise Generators
Matrix Mixer
Level Control, Compression/ Limiting Per I/O
Shelving, High Pass / Low Pass Filtering Per I/O
Eight Parametric Filters Per I/O
16 Non-Volatile Memory Presets
Front Panel Indicator LEDs
Software Bar Graph, DBU, & Volt Meters
USB and RS-232 Interface
MEQ Software Interface
Preset Masking Programs
24/7 Scheduler Programming
Day Light Savings Selection
System Commission Ramping
Power Failure Ramp Function
No Manual Controls on Front Panel to Prevent Tampering
Remote Control via USB, RS-232, or Ethernet
Warranty - Yes
Spec Sheet available - Yes
Height:
1 3/4" (4.445 cm)
Width:
19" (48.26 cm)
Depth:
8" (20.32 cm)
Shipping Weight:
13.20 lbs (5.99 kgs)
Maximum Frequency Response (Bandwidth):
20 kHz
Maximum Frequency Response (Bandwidth):
20000 Hz
Minimum Frequency Response (Bandwidth):
20 Hz
Minimum Frequency Response (Bandwidth):
0.02 kHz
Color:
Black
Warranty (Length/Type):
1 Year
Impedance:
10000 ohm
Number of Inputs:
2
Number of Outputs:
4
AC Voltage:
115 Volts
Active Power:
20 Watt
Depth:
8 in
Height:
1.75 in
Width:
19 in
Shipping Weight:
13.20 lbs
Computer Interface:
USB, RS-232, and Ethernet
Power Consumption:
<21 Watts
Maximum Input (balanced):
+20 dBu
Output Impedance (Balanced):
50 ohm
Maximum Output (Balanced):
+20 dBu
Dynamic Range:
115 dB (unweighted)
Common Mode Rejection:
>60 dB (50 Hz - 10 kHz)
Crosstalk:
<-100 dB
Distortion:
0.02 % (1 kHz @ +4 dB)
Processor:
32-bit (40-bit extended)
Sampling Rate:
96 kHz
Analog Converters:
High Performance 24-bit
Propagation Delay:
3 ms
Level Meters:
In / Out 5 segment LED
Gain:
-40 dB to +15 dB in 0.25 dB steps
Parametric Filters:
8 per I/O
Filter Bandwidth:
0.02 to 2.50 octaves (Q=0.5 to 72)
Masking Generators:
White / Pink Selectable Nonapparent 200 Minute Repeat Time