Strategy Series II Low Profile In-Ceiling 4-inch Coaxial Speaker
Series: Atlas
Model: FAP42TC
"Press fit" grilles blend better into contemporary architecture
Easy installation in drop tile or sheetrock ceilings via C-ring/V-rail tile bridge and "dog leg" mounting system (Included)
Enhanced quality 70.7V/100V internal transformers minimize insertion loss and maintain low frequency response while providing increased output for higher SPL applications
Front mounted tap selector switch for easy system tuning adjustments includes transformer bypass setting for 8 ohm direct coupled operation
Low depth (4") speaker system for limited space applications
The FAP42TC will satisfy the needs of owners, architects, contractors,and consultants by delivering true, high fidelity sound reproduction in an attractive and easy-to-install system. The FAP42TC is ideal for high-intelligibility voice, music, and signal reproduction in commercial, industrial, and institutional applications. The FAP42TC’s 130° dispersion angle effectively reduces the number of loudspeakers necessary to achieve coverage in distributed systems with low ceilings. The loudspeaker component matches the performance of the legendary Atlas Sound Strategy FA Series. High quality construction 4" coaxial cone
type driver includes a 1" voice coil and polypropylene cone with a butyl rubber surround. The 19 mm coaxially mounted tweeter is constructed of PEI. This loudspeaker is factory assembled in a deep drawn enclosure and includes a specially designed 16 watt low saturation, 70.7V / 100V transformer. A convenient front mounted selector switch allows tap selection without the need to remove the speaker from the ceiling. This switch also includes a transformer bypass setting for 8? operation. rubber surround. The 19 mm coaxially mounted tweeter is constructed of PEI. This loudspeaker is factory assembled in a deep drawn enclosure and includes a specially designed 16 watt low saturation, 70.7V / 100V transformer. A convenient front mounted selector switch allows tap selection without the need to remove the speaker from the ceiling. This switch also includes a transformer bypass setting for 8-ohm operation.
"Press fit" grilles blend better into contemporary architecture
Easy installation in drop tile or sheetrock ceilings via C-ring/V-rail tile bridge and "dog leg" mounting system (Included)
Enhanced quality 70.7V/100V internal transformers minimize insertion loss and maintain low frequency response while providing increased output for higher SPL applications
Front mounted tap selector switch for easy system tuning adjustments includes transformer bypass setting for 8 ohm direct coupled operation
Low depth (4") speaker system for limited space applications
UL Listing Pending
Loudspeaker Mount Type - Ceiling
Transformer Option - Yes
Spec Sheet available - Yes
Depth:
4 1/4" (10.7696 cm)
Shipping Weight:
13.00 lbs (5.90 kgs)
Speaker Diameter (Driver):
4 in
Maximum Frequency Response (Bandwidth):
20 kHz
Maximum Frequency Response (Bandwidth):
20000 Hz
Minimum Frequency Response (Bandwidth):
83 Hz
Minimum Frequency Response (Bandwidth):
0.08 kHz
Impedance:
8 ohm
Sensitivity:
88 dB
Transformer Option:
Yes
Height:
4.25 in
Shipping Weight:
13 lbs
Color:
White
Diameter:
10.50 in (26.67 cm)
Power Taps:
1, 2, 4, 8, 16
Speaker Type:
Coaxial
Dispersion:
130°
Frequency Response:
88dB Average
UL Listed/Standard:
1480
Woofer:
4-inch Poly Cone with Butyl Rubber Surround
Woofer Magnet Weight:
10 oz (364g)
HF driver:
Coaxially Mounted PEI Dome Tweeter
Enclosure Volume:
134 cubic inch
FAP42-RR
- Retro Ring for FAP42T/FAP42T-B/FAP42TC Speaker