Power Vector modular amplifiers offer a wide range of power from which to choose from, with five models ranging from 35W to 250W. The amplifiers are designed to work with both high- (70/25V) and low-(4/8-ohm) impedance speaker systems. Each model includes eight module bays for plug-in input modules and allows up to four levels of priority between modules. Two module bays are capable of accepting signal processing plug-in output modules. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status. An 11-segment LED output meter monitors output signal level. Each model includes a motorized master volume control that can be controlled using a remote volume control panel (RVCP, sold separately). *60W model with a large power reserve. *8 module input bays, accepts up to 2 signal-processing output modules or up to 8 input modules. *Four priority levels. *4-ohm, 8-ohm, 25V, & 70V outputs. *Rack mountable w/ kit (sold separately).
5 models ranging from 35W to 250W each;
a mixer-only version (VMIX) is also available
Capable of handling 70V, 25V, 8-ohm, and 4-ohm
speaker loads
8 module bays
Wide selection of advanced plug-in modules
(modules sold separately)
4 levels of priority between modules
2 module bays capable of handling plug-in signalprocessing output modules
11-segment LED?output level meter monitors the
output level of the power amplifier with Avg./Peak
meter switch
Motorized master volume control can be remotely
operated
Lockable switch permits user to select either
transformer-coupled outputs or a direct lowimpedance output
5-position barrier strip, with clamping washers,
provides connections for speaker loads
Bridging In/Out connector
External access to priority mute buses
Bridging jack and Mute terminals join multiple
Power Vector amps and mixers together
Independent volume control for each of the eight
module bays
Two-color LED for each channel indicates input
signal or clipping
Bass and treble control with bypass switch (located
in module bay 6)
125 Hz Low Cut switch (located in module bay 6)
Signal-processing insert jacks allow external
equipment to be inserted between the pre-amp
output and the power amp input
Pre-EQ, unbalanced, buffered output signal
(“post” all unit controls, but “pre” any external
“Insert” equipment connected)
Grounded, unswitched AC convenience receptacle with a 500W maximum capacity provided for
external equipment
8 module security cover/filler plates included with
amplifier (PVMC)
Push-button remote volume control panel (Model
RVCP, sold separately)
Security cover to selectively protect volume,
bass, and treble controls (Model PVSC, sold separately)
Rack mountable (with rack mounting kit RPK87,
sold separately)