The Crestron® CEN-CI3-3 is a single-space rack-mountable device designed to provide a versatile control interface and expansion solution using up to three 3-Series® Control Cards. It is used to expand the control ports of a 3-Series Control System®, and can be installed with the control system at the central equipment cabinet or located remotely near the device(s) under control. It can be placed on a shelf or rack-mounted using the rack ears included. It interfaces with the control system via Ethernet.
The CEN-CI3-3 accepts three 3-Series control cards (sold separately). Control cards are available to support bidirectional RS-232, 422, or 485; IR or 1-way serial; 0-10V analog inputs; digital logic inputs or outputs; and low-voltage relay outputs.
Accepts up to three 3-Series® Control Cards
Provides control port expansion for any 3-Series Control System®
External power pack included
Single-space 19-inch rack-mountable
Spec Sheet available - Yes
Depth:
10.06 in
Height:
1.70 in
Width:
17.28 in
Operating Temperature (Maximum):
113 F
Operating Temperature (Minimum):
41 F
Product Weight:
5.07 lbs
AC Voltage:
240 Volts
Current Draw:
2 Amps
DC Voltage:
24 Volts
Color:
Black
Communications:
Ethernet: 10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP, IEEE 802.3af and 802.3at Type 1 compliant
USB: For computer console
Connectors& Card Slots:
S1 - S3: (3) 3-Series® control card expansion slots
CONTROL SUBNET IN:
(1) 8-wire RJ45 jack
10Base-T/100Base-TX/1000Base-T Ethernet port
CONTROL SUBNET OUT:
(1) 8-wire RJ45 jack
10Base-T/100Base-TX/1000Base-T Ethernet port
24VDC 2A MAX:
(1) 2.1 x 5.5 mm DC power connector
24 Volt DC power input
PW-2420RU power pack included
G: (1) 6-32 screw, chassis ground lug
COMPUTER (front):
(1) USB Type B female
USB 2.0 computer console port (6 ft cable included)
For setup only
Controls & Indicators:
PWR: (1) Green LED, indicates operating power supplied from power pack
MSG: (1) Red LED, indicates unit has generated an error message
RESET: (1) Recessed pushbutton for hardware reset
SETUP: (1) Recessed pushbutton with red LED for Ethernet auto-discovery
SLOT 1 – 3: (3) Green LEDs, indicate control cards are inserted in the corresponding slots
CONTROL SUBNET IN (rear): (2) Bi-color green/amber LEDs, leftLED indicates Ethernet connection speed, rightLED indicates Ethernet activity
CONTROL SUBNET OUT (rear): (2) Bi-color green/amber LEDs, leftLED indicates Ethernet connection speed, rightLED indicates Ethernet activity
Environmental:
Humidity: 10% to 90% RH (non-condensing)
Heat Dissipation: 6 BTU/Hr without cards[1]
Enclosure:
Chassis: Metal, black finish, vented sides
Front Panel: Metal, black finish, polycarbonate label overlay
Mounting: Freestanding or 1RU 19-inch rack-mountable (adhesive feet and rack ears included)
Notes:
1. See individual control cards spec sheets for additional specifications.