The 376 tube channel strip with digital output is the latest addition to the Silver series family. The 376 puts the best of both worlds into one affordable package by combining the warmth of the vacuum tube, with the proprietary dbx Type IV conversion system. The 376 has taken the essential tools needed for channel strip processors and has greatly added to the feature list, making it an all inclusive toolbox that offers all of the effects required. With an effect menu list that includes such standard features as: a tube preamp section, 3-band parametric EQ section, compressor, De-esser and digital outputs, the 376 is the perfect companion piece for recording and tracking vocals and mic’d applications in the analog and digital domain. The 376 boasts many of the same features as other products in the Silver Series, such as +48V phantom power a phase invert switch, and low cut filtering. In addition, the 376 also offers digital output capabilities in both AES/EBU, and S/PDIF formats as standard features. The high impedance, 1/4" instrument input located on the front panel, as well as the mic/line switch and 20dB pad show our dedication to providing convenience in the studio. The LED meters provide a clear and concise visual of the signal processing at a glance. The rear panel includes both mic and line inputs and outputs, word clock sync input and output, insertion jack and digital outputs. Add selectable sampling rates of 44.1, 48, 88.2 or 96kHz, selectable dithering and noise shaping; and separate analog and digital output controls to this already impressive list of features, and we think you’ll agree that the 376 lives up to the uncompromising standards of dbx Professional Products. The new 376 tube channel processor with digital output capabilities.
Tube microphone pre-amp
200V tube plate voltage
Selectable mic/line switch
+48V phantom power
3-band parametric EQ
Compressor
De-esser
Front panel instrument input
Drive meter LEDs
Threshold and De-esser meters
8 segment analog or digital meter
Type IV conversion system
Selectable sampling rate (96, 88.2, 48, 44.1kHz)
24, 20 and 16 bits wordlength
AES/EBU and S/PDIF digital outputs
Selectable dither and noise-shaping algorithms
Word clock sync input and output
Warranty - Yes
Spec Sheet available - Yes
Maximum Frequency Response (Bandwidth):
75 kHz
Maximum Frequency Response (Bandwidth):
75000 Hz
Minimum Frequency Response (Bandwidth):
10 Hz
Minimum Frequency Response (Bandwidth):
0.01 kHz
Sampling Rate/Frequency:
96 kHz
Sampling Rate/Frequency:
96000 Hz
Sampling Rate/Frequency:
0 Ghz
Certifications:
CE
Input Impedance:
330 ohm
Output Impedance:
120 ohm
Quantization:
16 bit
Total Harmonic Distortion + Noise (THD+N):
0.35 %
AC Voltage:
230 Volts
Active Power:
35 Watt
Mic Preamp Connector:
Female XLR Floating balanced, Pin 2 hot
Mic Preamp Input Impedance:
330 ohms
Mic Preamp maximum input level:
-9dBu or +11 dBu with 20dB pad engaged
Mic Preamp Equivalent Input Noise (EIN):
-120dBu typical with a150 ohms source load, 20Hz to 20kHz BW
Compressor Ratio:
Variable, 1:1 to Infinity:1, 60dB maximum compression