The 8010TM-IRIG SDI Time Code Master is a full function time code reader/generator system for serial digital video. The 8010TM-IRIG is a combination generator for SMPTE Linear Time Code (LTC) and Digital Vertical Interval Time Code (D-VITC), reader for IRIG-B code and D-VITC (standard SMPTE time code and special IRIG encoded VITC), and contains a high resolution character inserter which can be burn the generator or reader numbers directly into the digital program output as well as an optional analog monitoring output. The 8010TM-IRIG reads IRIG-B code commonly in use within the United States government agencies and supporting private industries and provides a display of days, hours, minutes, seconds and milliseconds in the character inserter. This IRIG information is inserted into a special line of vertical interval time code which is protected by a unique cyclic redundancy checkword (CRC) so that tape recoders and other devices do not confuse it with standard SMPTE ST 266 D-VITC. This special D-VITC can be decoded by the 8010TM-IRIG's D-VITC reader to allow you to encode the IRIG information onto a 'clean' video tape and then display the IRIG information later on playback. The 8010TM-IRIG SMPTE Time code generator can also be slaved to incoming IRIG code. The millisecond count will be converted to the closest frame number and can also be stored in the generator user bits along with the IRIG day of the year. In the continuous jam sync mode, the generator is slaved to the reader, and will follow code any discontinuities of the reader. The generator may also be momentarily synchronized to the reader, and then it continues to increment normally regardless of the reader code. Momentary jam is the recommended mode when synchronizing to IRIG-B sources so that the resulting SMPTE time code does not contain discontinuities due to the different time bases of 29.97 frame per second video and real time of the IRIG code. In NTSC related video systems, the SMPTE generator should be operated in the Drop Frame counting mode when trying to synchronize the SMPTE generator to IRIG. The 8010TM-IRIG will accept 525 or 625 line component digital video. The 8010TM-IRIG's SMPTE time code generator can be preset to lock to the digital program video either by simple frame locking, or where necessary it will colour lock to an analog Colour Reference in accordance with the 4 field NTSC or 8 field PAL colour sequence. In NTSC related colour systems operation, with a frame rate of 29.
Accepts 4:2:2 (525 and 625 line) digital video
Serial digital video input provides automatic cable equalization on cable lengths up to 200 meters of low loss coax such as Belden 8281
Optional Bypass relay for Serial digital video program output activates on power loss or from the front panel menu
Auxiliary serial digital video output (not bypass protected)
Passes embedded audio and other ancillary data signals
LTC and D-VITC SMPTE Time Code generator
IRIG data encoded to second line of VITC generator with special CRC
SMPTE D-VITC Time Code or IRIG encoded D-VITC reader
IRIG reader reads 1kHz IRIG-B format sine wave amplitude modulated and pulse width modulated codes (formats B002 and B122)
IRIG CS-6 compatible serial data output to drive external IRIG displays
SMPTE Time Code LTC and D-VITC generators can be slaved momentarily or continuously to IRIG reader - converts milliseconds to closest video frame number.
Milliseconds and days can be transferred to VITC user bits
Character Inserter displays IRIG day and time to millisecond resolution in the picture in IRIG modes
Character Inserter displays time and user bits in the picture in SMPTE modes
Separate positioning of each character window
16 digit Alpha-numeric display, with 16 pushbuttons
Momentary and Continuous jam sync modes
User bit transfer from reader time or user bits
Optional composite monitor output converts digital video to analog
GPI Remote Control mode allows user to pass remote control contact closure information in VITC user bits
Recalculates and inserts EDH on the SDI output
Serial Remote Control of most functions - Broadcasts reader data or sends it on request
Rack mountable
Optional dual redundant power supply configuration
Spec Sheet available - Yes
Serial Digital Video Input - Standard:
SMPTE ST 259 (270Mb/s)
Serial Digital Video Input - Number of inputs:
1
Serial Digital Video Input - Connector:
BNC per IEC 61169-8 Annex A
Serial Digital Video Input - Equalization:
Automatic 200m @ 270Mb/s with Belden 8281 or equivalent cable; Automatic 150m @ 270Mb/s when bypass relay is active
Serial Digital Video Input - Return Loss:
> 15dB up to 540Mb/s
Serial Digital Video Input - D-VITC Reader:
SMPTE ST 266
Serial Digital Video Output - Number of Outputs:
1 with relay bypass (+BP option), 1 additional output
Serial Digital Video Output - Connector:
BNC per IEC 61169-8 Annex A
Serial Digital Video Output - Signal Level:
800 mV nominal
Serial Digital Video Output - DC Offset:
0±0.5 V
Serial Digital Video Output - Rise/Fall Time:
900 ps nominal
Serial Digital Video Output - Overshoot:
<10 % of amplitude
Serial Digital Video Output - Return Loss:
>15 dB up to 540Mb/s
Serial Digital Video Output - Wideband Jitter:
<0.2 UI
Analog Monitor Video Outputs - Standard:
Analog composite NTSC if input is 525i/59.94 video; Analog composite PAL if input is 625i/50 video
Analog Monitor Video Outputs - Number of Outputs:
2
Analog Monitor Video Outputs - Connector:
BNC per IEC 61169-8 Annex A
Analog Monitor Video Outputs - Signal Level:
1V p-p nominal, internally adjustable
Analog Monitor Video Outputs - DC Offset:
0±0.1 V
Analog Monitor Video Outputs - Return Loss:
>35dB up to 5MHz
Analog Monitor Video Outputs - Frequency Response:
0.8dB to 4MHz
Analog Monitor Video Outputs - Differential Phase:
<0.9 ° (< 0.6° typical)
Analog Monitor Video Outputs - Differential Gain:
<0.9 % (< 0.5% typical)
Analog Monitor Video Outputs - SNR:
>56dB to 5MHz (shallow ramp)
Analog Monitor Video Outputs - Impedance:
75 ?
LTC Generator - Standard:
SMPTE ST 12-1
LTC Generator - Frame Rate:
25 and 30 fps nominal
LTC Generator - Connector:
3 pin male XLR type
LTC Generator - Signal Level:
Adjustable, 0.5V to 4V p-p
IRIG Reader - Standard:
IRIG 200-95 Formats B002 and B122
IRIG Reader - Connector:
3 pin female XLR type
IRIG Reader - Signal Level:
0.2V to 4V p-p, balanced or unbalanced
General Purpose Input and Output - Inputs:
6, programmable control functions
General Purpose Input and Output - Outputs:
2, programmable tally functions
General Purpose Input and Output - Connector:
9 pin female ""D""
General Purpose Input and Output - Type:
Opto-isolated, active low
General Purpose Input and Output - Signal Level:
Pulled up to +5V, 3.3V DC provided
Serial Remote Control - Standard:
RS-232 or RS-422, programmable baud rate
Serial Remote Control - Connector:
9 pin female "D"
Serial Remote Control - Control:
Firmware upgrade, serial remote control of all functions
Electrical - Power:
Auto ranging 100-240V AC, 50/60Hz 30 Watts
Electrical - Fuse Rating:
250V, 1A time delay
Electrical - Safety:
TÃœV Listed, Complies with EU Safety Directive