The UP-4XP ultracompact loudspeaker is ideally suited for applications requiring a small, inconspicuous cabinet that also delivers high sound pressure levels, low distortion, and uniform directional control. The self-powered UP-4XP offers exceptional audio performance in a compact package with the advantages of a remote power supply. As a standalone loudspeaker, the UP-4XP can be used for vocal reinforcement, frontfill coverage, and delay coverage for under-balcony applications. The UP-4XP can also be paired with an optional subwoofer to create a full-range system. The UP-4XP boasts a wide operating frequency range of 66 Hz to 18 kHz and a maximum peak SPL of 121 dB, with very low distortion. The unit's high-frequency section includes a 1-inch metal dome tweeter on a constant-directivity, high-frequency horn with a 100-degree beamwidth. The low/ mid-frequency section includes two 4-inch cone transducers that work in parallel at low frequencies — delivering a combined acoustic output — with one of the drivers rolling off at higher frequencies to prevent interference (due to comb filtering effects) in the crossover region. The proprietary UP-4XP drivers, which are manufactured at Meyer Sound's factory in Berkeley, California, are powered by three channels of onboard power amplification that include an active crossover, driver protection, and frequency and phase correction circuitry. The UP-4XP can be equipped with either a Phoenix 5-pin male or sealed SwitchCraft® EN3 male connector for receiving balanced audio and DC power. Powering the unit from an external source eliminates the need for wiring conduits while still preserving the advantages of self-powered systems. The UP-4XP's amplifier and signal- processing circuits are designed to store DC power and tolerate voltage drops, thereby accommodating light-gauge cables and lengthy cable runs. UP-4XP loudspeaker systems require an MPS-488HP external power supply. The rack mount multi-channel power supply can deliver both balanced audio and 48 V of DC power to eight UP-4XP loudspeakers at cable lengths of up to 150 feet, with just 1 dB of loss in peak SPL using 18 AWG wire. The use of composite multiconductor cables (such as Belden 1502) allows a single cable to carry both audio and DC power to the UP-4XPs. Longer cable lengths are possible for moderate applications that don't drive the loudspeakers to maximum output, or when using heavier wire gauges for the DC power. The UP-4XP's durable cabinet is coated with a black textured finish and includes top and bottom mounting plates with 3/8"-16 or metric M10 threaded nuts. QuickFly mounting options include the MUB-UP4 U-bracket, MYA-UP4 cradle-style yoke, and 1-3/8" (35 mm) diameter pole-mount adaptor.
Extraordinary fidelity and power capability in an ultracompact package
Metal dome tweeter delivers a smooth high-frequency response
Wide, symmetrical pattern covers a broad listening area
Unique crossover design eliminates combing and yields a consistent midrange response
Exceptional SPL to size ratio
Supports long cable runs with light-gauge cables
Applications: Frontfill and under-balcony fill coverage, Theatrical sound reinforcement and special effects, Portable and installed AV systems, Compact voice reinforcement systems
Horizontal Symmetry - Yes
Vertical Symmetry - Yes
Spec Sheet available - Yes
Speaker Diameter (Driver):
4 in
Maximum Frequency Response (Bandwidth):
17.50 kHz
Maximum Frequency Response (Bandwidth):
17500 Hz
Minimum Frequency Response (Bandwidth):
72 Hz
Minimum Frequency Response (Bandwidth):
0.07 kHz
Coverage Horizontal:
100 degrees
Coverage Vertical:
100 degrees
Horizontal Symmetry:
Yes
Impedance:
10000 ohm
Maximum SPL (Sound Pressure Level):
121 dB
Sensitivity:
-2 dB
Vertical Symmetry:
Yes
Current Draw:
0.23 Amps
DC Voltage:
48 Volts
Depth:
5.25 in
Height:
5.54 in
Width:
13.84 in
Product Weight:
12.20 lbs
Color:
Black
Dynamic Range:
> 105 dB
Crossover:
1.5 kHz
Transducers:
Two 4" low-frequency cone drivers (Low Freq), One 1" metal dome tweeter (High Freq)
Amplifier - Type:
Three-channel (class D)
Amplifier - Output Power:
500 W (total for all three channels)
Amplifier - THD, IM, TIM:
< 0.02 %
Amplifier - Load:
4 Ohms each low channel; 8 Ohms high channel