DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, standalone power source or an automotive inverter. It supplies up to 750W of continuous 230Vac power to 2 AC outlets from any 12V battery or automotive DC source. When AC cable is connected to live wall socket, commercial power passes through to connected equipment and the battery set is recharged via 3-stage, selectable 5/20A charging system. In UPS mode, the APS system responds to blackouts and severe voltage fluctuations with near instantaneous automatic transfer to battery-derived AC output. It includes set of high current DC input terminals for simple installation. It has reliable large transformer design with frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on startup. Optional APSRM4 wired remote power switch with full status LEDs provides remote power inverter on/off switching and continuous status information. It supports an unlimited amount of runtime with any number of user-supplied batteries connected. It is highly adaptable to variety of applications and site conditions with adjustable charger settings for wet/gel battery types and selectable line to battery power transfer voltages. Versatile inverter/charger system with auto-transfer switching serves as an automotive inverter for RVs, over-the-road trucking, conversion vans, fleet service vehicles, standalone alternative power source for off-grid, alternative energy or export applications and as an uninterruptible power supply (UPS) for items compatible with 10ms transfer time.
Supports 230Vac output from 230Vac line power source or 12Vdc battery source
DoubleBoost inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10s
3-stage, selectable 5/20A battery charger with adjustable settings for wet/gel battery types
Dual C13 output receptacles pass 120V line power or inverter output through to connected equipment
3-position operating mode switch supports auto mode to enable automatic transfer between DC and AC modes
Set of 6 front panel LEDs display continuous status
Set of 4 additional configuration dip switches support 4 levels of charger limiting relative to output load size, battery equalization program and battery charger low/high settings
Automatic overload and thermal shutoff
Front panel remote control connector enables remote off/on switching
Warranty - Yes
Spec Sheet available - Yes
Number of Outlets:
2
AC Voltage:
230 Volts
DC Voltage:
12 Volts
Depth:
9 in
Height:
7 in
Width:
8.75 in
Product Weight:
18.60 lbs
Shipping Weight:
20 lbs
Warranty (Length/Type):
1-year Limited
Frequency Compatibility:
50 Hz
Continuous Output Capacity:
750 W
Peak Output Capacity:
1500 W
Output Nominal Voltage:
230 V
Overload Protection:
Includes 3A input breaker dedicated to the charging system and 4A output breaker for AC output loads
Outlet quantity/type:
2 AC outlets
DC Maximum Input Full Continuous Load:
72 A (at 12Vdc)
AC Maximum Input:
6.2 A (at 230Vac)
DC Input Connection Type:
Set of 2 DC bolt-down terminals
AC Input Connection Type:
IEC-320 C14 inlet connection
DC Battery System Voltage:
12 VDC
Battery Recharge Rate:
5/20 A (selectable)
Cooling Method:
Multi-speed fan
Construction:
Polycarbonate
Relative Humidity:
0 to 95 % (non-condensing)
Package Includes:
APSX750 inverter/charger, instruction manual, warranty information
RoHS Compliant:
Yes
APSX1250
- 1250W APS X Series 12VDC 230V Inverter/Charger with Auto Transfer Switching, 2 C13 Outlets
APSX6048VRNET
- 6000W APS X Series 48VDC 208/230V Inverter/Charger with Pure Sine-Wave Output, AVR, Hardwired
WEXT1D
- 1-Year Extended Warranty - For select Tripp Lite Products
WEXT2D
- 2-Year Extended Warranty - For select Tripp Lite Products
WEXT3D
- 3-Year Extended Warranty - For select Tripp Lite Products