SMX1050SLT line-interactive UPS offers battery-derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network-grade AC surge suppression
1050VA/650W power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic devices
Large internal batteries offer runtimes of 20 min. at half load (525VA/325W) and 7 min. at full load (1050VA/650W)
Automatic voltage regulation (AVR) circuits maintain user-selectable 220V, 230V or 240V nominal output over an input voltage range of 174-266V (220V), 182-278V (230V) or 190-290V (240V)
Tripp Lite's SMX1050SLT intelligent, line-interactive sine wave UPS system protects servers, networking accessories and telecommunications equipment from blackouts, voltage fluctuations and transient surges. Large internal batteries offer 20 min. half load runtime and 7 min. full load runtime. 1050VA/650W power handling capability and full-time sine wave output offer guaranteed compatibility with networking, telecom and other sensitive electronic applications. Includes 8 UPS-protected C13 output receptacles. Supports simultaneous remote monitoring of UPS and site power conditions via built-in network accessory card slot, USB and DB9 serial monitoring ports. HID-compliant USB interface enables full integration with built-in power management and auto shutdown features of Windows and Mac OS X. Optional SNMPWEBCARD accessory enables remote monitoring of UPS as a managed device via network management console applications. Communications interfaces support messaging of UPS and line power status, plus output power control for delayed or immediate reboot of all connected devices at once. Includes PowerAlert UPS monitoring and unattended shutdown software with management support for an unlimited number of network UPS systems. Single-line tel/DSL and network Ethernet line surge suppression. Built-in audible alarm and 9 LEDs offer status notification for line power, battery power, battery charge level, load level, plus AVR boost and trim operational status information. Network-grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges. Attractive, all-black tower housing.
SMX1050SLT line-interactive UPS offers battery-derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network-grade AC surge suppression
1050VA/650W power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic devices
Large internal batteries offer runtimes of 20 min. at half load (525VA/325W) and 7 min. at full load (1050VA/650W)
Automatic voltage regulation (AVR) circuits maintain user-selectable 220V, 230V or 240V nominal output over an input voltage range of 174-266V (220V), 182-278V (230V) or 190-290V (240V)
8 x C13 output receptacles
IEC320-C14 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles
PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, email notification, event logging and running of user-defined script commands
Offers simultaneous monitoring by up to 3 directly connected devices through included USB, DB9 and SNMP
requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software
Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity
HID-compliant USB interface enables full integration with built-in power management and auto shutdown features of Windows and Mac OS X
Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again
9 LEDs provide continuous status information of UPS operating parameters and site power quality
Hot-swappable batteries allow on-site battery replacement without powering off connected equipment
Single line tel/DSL and network Ethernet line surge suppression
CE/IEC 62040, GOST, SASO
Package Includes: SMX1050SLT UPS System, PowerAlert Software CD-ROM
USB and serial cabling, 2 x IEC C13-to-C14 jumper cables and Owner's manual with warranty information
Nominal Voltage details:
230 V default (voltage selection via back panel switches)
Frequency Compatibility:
50 / 60 Hz
Output voltage regulation (line mode):
-9%, +5%
Output voltage regulation (Battery mode):
+/- 5 %
Built-in UPS output receptacles:
8 C13 outlet(s)
Included output power cables:
Includes 2 C13 to C14 output power cables
Output AC waveform (AC mode):
Sine wave
Output AC waveform (battery mode):
Pure Sine wave
Nominal Input Voltage(s) Supported:
220V AC; 230V AC; 240V AC
UPS input connection type:
C14 inlet
UPS input connection description:
IEC320-C14 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles
Half load runtime (minutes):
20 min (325w)
Voltage regulation description:
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 182 to 278 (230v), 190 to 290 (240v), 174 to 266 (220v)
Overvoltage correction:
Voltage reduction of 12% applies when input is 244 to 278 (230v), 254 to 290 (240v), 232 to 266 (220v)
Undervoltage correction:
Voltage boost of 14% applies when input is 182 to 206 (230v), 190 to 216 (240v), 174 to 198 (220)
UPS AC suppression joule rating:
350
UPS AC suppression response time:
Instantaneous
UPS Dataline suppression:
1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet
EMI / RFI AC noise suppression:
Yes
UPS Shipping dimensions (height x width x depth):
14 x 9.8 x 18.5 inches
Storage Temperature Range:
+5 to +122 °F
Relative Humidity:
0 to 95 % non-condensing
AC mode BTU / hr. (full load):
141.1
Battery mode BTU / hr. (full load):
359.8
Audible Noise:
< 50 dBA at Front Side 1 Meter
Transfer Time:
4-8 milliseconds
Low voltage transfer to battery power (setpoint):
174V (220V), 182V (230V) or 190V (240V)
High voltage transfer to battery power (setpoint):
266V (220V), 278V (230V) or 290V (240V)
UPS Certifications:
Tested to CE (EU); Tested to GOST (Russia); Tested to SASO (Saudi Arabia); Meets FCC Part 15 Category B (EMI)
UPS Certification details:
CE / IEC 62040
RoHS Compliant:
Yes
Cisco Compatible:
Yes
WEXT1D
- 1-Year Extended Warranty - For select Tripp Lite Products
WEXT2D
- 2-Year Extended Warranty - For select Tripp Lite Products
WEXT3D
- 3-Year Extended Warranty - For select Tripp Lite Products