The AD9152 is a dual, 16-bit, high dynamic range digital-to analog converter (DAC) that provides a maximum sample rate of 2.25 GSPS, permitting a multicarrier generation up to the Nyquist frequency. The DAC outputs are optimized to interface seamlessly with the ADRF6720 analog quadrature modulators (AQMs) from Analog Devices, Inc. An optional 3-wire or 4-wire serial port interface (SPI) provides for programming/readback of many internal parameters. Full-scale output current can be programmed over a range of 4 mA to 20 mA. The AD9152 is available in an 56-lead LFCSP. The AD9152 is a member of the TxDAC+® family.
- Supports input data rates up to 1.125 GSPS
- Proprietary low spurious and distortion design
- Single carrier LTE 20 MHz bandwidth (BW), ACLR = 77 dBc at 180 MHz IF, SFDR = 72 dBc at 150 MHz IF, -6 dBFS
- Flexible 4-lane JESD204B interface
- Selectable 1x, 2x, 4x, 8x interpolation filter
- Low power architecture
- Input signal power detection
- Emergency stop for downstream analog circuitry protection
- Transmit enable function allows extra power saving
- High performance, low noise PLL clock multiplier
- Digital inverse sinc filter and programmable finite impulse response (FIR) filter
- Low power: 1223 mW at 1.5 GSPS, 1406 mW at 2.0 GSPS, full operating conditions
- 56-lead LFCSP with exposed pad
- Applications
- Wireless communications
- Multicarrier LTE and GSM base stations
- Wideband repeaters
- Software defined radios
- Wideband communications
- Point to point microwave radios
- LMDS/MMSD
- Transmit diversity, multiple input/multiple output (MIMO)
- Instrumentation
- Automated test equipment