The AP-S15HRIP half-rack width power conditioner with LAN monitoring & remote control for AC power distribution management. The AP-S15HRIP features a web based user interface (UI) that can monitor voltage, current, temperature and humidity. Through the UI, alarms can be set to alert users when a fault condition has occurred via the network UI or fault contacts. The AP-S15HRIP’s five rear outlets are programmable and can be scheduled to sequence On / Off individually or in groups on a 24-hour / 7-day schedule. Each AC outlet has a front panel LED status indicator that can also be used to manually turn the outlet On or Off. This feature can be disabled via the UI for increased security. A front panel unswitched AC outlet is also included.
The AP-S15HRIP utilizes PC based IP discovery software to automatically identify units connected to the network. An LED display, AtlasIED model AP-LEDIP, is included to provide a visual reference of the voltage, current, temperature or humidly data within the rack in real time. The AP-LEDIP can also be used to read the IP address of the unit eliminating the need to use the discovery software. The external temperature/humidity probe can be used to monitor rack climate conditions to activate a cooling system if needed. Programable alarm settings are easily configured with fault logs and fault reporting via the UI. The unit or individual outlets can be tested or monitored for on active status via the network Auto Ping Reset feature.
The AP-S15HRIP features noise filtering for unwanted Radio Frequency Interference (RFI) that is commonly introduced into AC lines by nearby radio transmitters or wireless products that commonly deteriorate video signals and that can be heard as static in audio signals. The AP-S15IP is designed to allow the installer to select the power cord length that is required for the installation. A removable 2m IEC power cord with a retainer bracket is supplied with the unit.
The AP-S15HRIP is designed to be mounted in a half-width rack, but can also be rack mounted into standard 19" equipment racks by using the optional PA702-RMK rack mount kit. This kit allows you mount an AP-S15HRIP by itself or in conjunction with another Atlas half width rack product such as the DPA-102PM, PA40G/PA60G, or MA40G/MA60G in a 19" 1RU space.
15A Rack Mount Power Strip with web enabled monitoring & control
Supports LAN (Local Area Network) type networks
On-board IP Address display
IP discovery PC software
6 total AC Outlets: 5 rear panel programmable switched outlets, 1 front panel un-switched convenience outlet
Individual outlet on/off manual switch and LED indicator (enable/disable)
Removable 15A IEC power cord with retainer bracket
RFI noise filtering
Earth ground fault connection indicator
Web user interface
DHCP or static IP addressable
Voltage, current, temperature and humidity monitoring capability
Over-voltage, current, temperature and humidity alarm settings
Each outlet can be individually managed remotely
User-definable names for each outlet
User-definable delay time and sequence
Temperature setting for AC fan activation
Fault log with reporting
Fault reporting GPIO port
Password protection
APRST (Auto PING Reset)
User-definable 24/7 schedules of individual outlets to switch devices on or off
2-Meter humidity/temperature probe
AP-LEDIP display panel shows voltage, current, temperature, humidity and IP Address
UL Rated - Yes
Spec Sheet available - Yes
System:
Type:
Networked AC Power Distribution Conditioner and Suppressor
Load Rating:
Max Load 15A (1800W), Rated Load 12A (1440W)
Network Type:
LAN, WEB User Interface
Front Panel:
Activation Switch:
Rocker with Security Bar
Circuit Breaker:
15A Resettable Power Switch
Outlet On / Off Switches:
Momentary Manual
AC Outlets:
NEMA5-15R Unswitched, Qty 1
Front Panel Indicators:
Power On Indicator:
Power Switch LED, Red
Outlet Status Indicators:
Green, Qty 5
Over Temperature Alarm Indicator:
Red, Programmable Range 50° - 176°F , 10° - 80°C
Over Humidity Alarm Indicator:
Red, Programmable Range 15 - 95%
Over Current / Voltage Alarm Indicator:
Red, Programmable Range High - Voltage 100V - 140V, Under Voltage 80V- 120V
AC Fault Indicator:
Red, Illuminates When Surge Protection is Damaged
AC Ground Indicator:
Red, Illuminates When Earth Ground Is Bad
Rear Panel:
AC Mains IEC Power Socket:
IEC NEMA 5-15P 15A 1800W with Power Cord Retainer