The Atlas Sound High Power Amplifier "HPA" Series has been designed to be versatile for uses in both commercial 70V/100V distributed systems and professional applications that require amplifiers to handle 4 and 2 ohm loads. The HPA is compact and lightweight in comparison to other models delivering the similar power levels. The HPA Series features generation II Class I Output topology that gives the efficiency close to a Class D amplifier with the sound quality of a Class AB amplifier. The power supply is switch mode global auto sensing gen 3 design that maintains a stable output during fluxuating power conditions. The power supply and output stage collectively are designed to deliver exceptional dynamic high output voltage and current to virtually any speaker load.
The HPA Series features front panel detented level controls with a security cover, remote turn on, balanced inputs, fault reporting and an accessory card slot for an optional Danteâ„¢ 2-channel digital audio interface. Cooling is not an issue because of the unique output stage low resistance direct couple thermal transfer design. HPA also is energy efficient and meets Energy Starr standards with only drawing 1W of power in standby mode.
Whether your application is a large distributed constant voltage sound system or a high SPL sound reinforcement system, the Atlas Sound HPA Series is the answer for high power/cost effective amplification need.
70.7V/100V and 2-ohm, 4-ohm, and 8-ohm Output Configurable
Balanced Inputs Euro Block Phoenix Style Connector
High Efficiency Fan Cooling
Remote Turn On
Accessory Card Slot for Optional Danteâ„¢ Digital Network Audio Card
Short-Circuit, Temperature, and DC Offset Protection
Soft Clip Limiter Protection
Stepped Attenuators with Security Covers
Stereo, Bridge, or Parallel Operating Modes Selectable via Rear Mounted Switch
Auto Sensing 120V/220V AC Mains Power Supply
Meets Energy Star Standards - 1W Standby Mode
Amplifier Type - Power Amplifier
Dante Enabled - Yes
Maximum Frequency Response (Bandwidth):
20 kHz
Maximum Frequency Response (Bandwidth):
20000 Hz
Minimum Frequency Response (Bandwidth):
20 Hz
Minimum Frequency Response (Bandwidth):
0.02 kHz
Number of Channels:
2
Rack Units (Height):
2
Sensitivity:
85 dB
Total Harmonic Distortion + Noise (THD+N):
0.05 %
Depth:
15 in
Height:
3.50 in
Width:
19 in
Product Weight:
34 lbs
Power Output:
70.7V: 2 x 2100W 100V: 2 x 2100W 8 ohms: 2 x 1200W 4 ohms: 2 x 2100W 2 ohms: 2 x 2500W 8 ohm Bridged: 1 x 3800W 4 ohm Bridged: 1 x 4800W
connector type:
Terminal Block & Phoenix
Number of Fans:
1 - Variable Speed
BTU All Channels Driven AES:
5975 BTU (70.7V, 120VAC)
Max Current All Channels Driven Continuous:
43A
Finish:
Black
HPA1302
- 2-channel 1300W High Power Commercial Amplifier
HPA2602
- 3200W High Performance, Dual Channel Commercial Amplifier
HPA602
- 2-channel 600W High Power Commercial Amplifier
HPA-DAC2
Dante Network Audio Card for HPA Series Amplifier