The V2300 is a 4-channel 48V OCTO-BUS I/O plug-in card for VADIS frames. The OCTO-BUS Card is designed for use with Digital Public Address (PA) Systems and with Radio Broadcast (RBC) Systems.
The OCTO-BUS is a proprietary KLOTZ DIGITAL, fully bidirectional bus system for the exchange of audio and control data between a VADIS frame and its connected OCTO-BUS modules or between a VADIS frame and other OCTO-BUS-connected VADIS frames. Apart from the audio and control data, the OCTO-BUS lines can also carry power, for example in the context of a PA System to internally supply connected OCTO-BUS Paging Panels. If necessary, the power has to be fed into the bus lines, e.g. via a Line Interface.
Exchange of audio and control data between the following devices:
VADIS frame holding the OCTO-BUS Card and OCTO-BUS modules or
VADIS frame holding the OCTO-BUS Card and other VADIS frames, one other frame per OCTO-BUS
Transmission of commands from the frame to the OCTO-BUS modules
Transmission of status replies of the OCTO-BUS modules to the VADIS frame
Monitoring of the supply voltage of the Line Interface
Monitoring of the states of the OCTO-BUS modules
Provides 32 I/O Channels Via the OCTO Bus
Designed for Use in the V212C-HDD and V888 VADIS Frames
Input/Output Board/Card Type - Audio
Spec Sheet available - Yes
Sampling Rate/Frequency:
48 kHz
Sampling Rate/Frequency:
48000 Hz
Sampling Rate/Frequency:
0 Ghz
DC Voltage:
48 Volts
Number of OCTO-BUS lines:
4
Connectors:
4 x Built-In RJ45 Connectors, 8-Pin, Female
Audio Resolution:
24 bit
Number of Audio Channels:
4 x 8 Channels at 16 Bit Audio Resolution