Maximum intelligibility and clean, accurate reproduction for vocalists, lecturers, stage and television talent, and houses of worship
Low-profile design (a mere 5mm in diameter) is ideal for applications requiring minimum visibility
Operates on battery or phantom power
All wireless models available in either low-reflectance black or beige
Extensive array of provided accessories includes a clothing clip, viper clip, magnet clip and lanyard (black models only), windscreens, element covers, interchangeable single and double mic holders
The AT899 is a subminiature clip-on/lavalier condenser microphone with an omnidirectional polar pattern. It is designed to provide accurate reproduction for vocalists, lecturers, stage and television talent, and houses of worship. The microphone is intended to be worn on the clothing or hidden in props for excellent yet unobtrusive sound pickup. The wide-range capability of the microphone ensures clean, accurate reproduction with high intelligibility for speakers, presenters and other performers. Its small size makes it ideal for use in applications where minimum visibility is required. The microphone requires 11V to 52V phantom power or a 1.5V AA battery for operation. A battery need not be in place for phantom power operation. The microphone includes a 3m (9.8') permanently attached miniature cable. Its free end connects to the provided AT8537 power module via a TA3F-type connector.
Maximum intelligibility and clean, accurate reproduction for vocalists, lecturers, stage and television talent, and houses of worship
Low-profile design (a mere 5mm in diameter) is ideal for applications requiring minimum visibility
Operates on battery or phantom power
All wireless models available in either low-reflectance black or beige
Extensive array of provided accessories includes a clothing clip, viper clip, magnet clip and lanyard (black models only), windscreens, element covers, interchangeable single and double mic holders
Accessories available separately include complete accessory kits, clothing clips, three-pack element covers and three-pack windscreens
9.8ft (3m) cable permanently attached to mic, TA3F connector at power module
RoHS compliant—free from all substances specified in the EU directive on hazardous substances
Microphone Connectivity - Wired
Microphone Type - Condenser
Polar/Pickup Pattern - Omnidirectional
Warranty - Yes
ROHS Compliant - Yes
Spec Sheet available - Yes
Cable Length:
4.59 ft
Maximum Frequency Response (Bandwidth):
20 kHz
Maximum Frequency Response (Bandwidth):
20000 Hz
Minimum Frequency Response (Bandwidth):
20 Hz
Minimum Frequency Response (Bandwidth):
0.02 kHz
Dynamic Range:
108 dB
Impedance:
250 ohm
Maximum SPL (Sound Pressure Level):
138 dB
ROHS Compliant:
Yes
Signal to Noise Ratio:
64 dB
Wireless:
No
Current Draw:
0 Amps
Product Weight:
0.22 lbs
Warranty (Length/Type):
5 Years/Limited End-user
Low Frequency Roll-off:
80Hz, 12dB/octave
Sensitivity:
-43 (Phantom)/-46 (Battery) dB
Length:
0.63 in
Body Diameter:
0.20 in
DC Voltage:
11 to 52 Volts
DIMENSIONS (POWER MODULE):
5.71 (long), 0.83 (diameter) in
OUTPUT CONNECTOR (POWER MODULE):
Integral 3-pin XLRM
Case Style:
M29
AT831b
- Cardioid condenser lavalier microphone with battery/phantom power operation
AT831cW
- Cardioid condenser lavalier microphone with 55" cable perm. attached with locking 4-pin HRS-type connector for AT wireless systems (UniPak transmitters)
AT831R
- Cardioid condenser lavalier microphone (clip on) with phantom power operation
AT898
- Subminiature cardioid condenser lavalier microphone with battery/phantom power operation
AT898cW
- Subminiature cardioid condenser lavalier microphone with 55" cable terminated with locking 4-pin HRS-type connector for Audio-Technica wireless systems using UniPak transmitters