Pro AV Catalog
2222 E 52nd Street North
SIOUX FALLS, SD 57104
United States

AVPro Edge

AVPro Edge specializes in full bandwidth audio/video distribution, working alongside HDMI, HDBaseT and HDCP, we pride ourselves on developing uniquely engineered solutions for today’s integrator.

Model: AC-MXNET-10G-SW24C

The AC-MXNET-10G-SW24C is a 24-port, 10Gbps hybrid PoE++/PoE+ (Ports 1-8 are PoE++, ports 9-24 are PoE+) network switch developed and manufactured by AVPro.
Featured Product
Project List
REDISCOVER THE AVPRO EDGE 444 EXTENDER LINE-UP
Posted on Monday, June 22, 2020
REDISCOVER THE AVPRO EDGE 444 EXTENDER LINE-UP

The "444" line of premium HDMI extenders from AVPro Edge are built to handle full 4K. When we say full 4K that means maxing out the HDMI 2.0 spec; 18Gbps data rate, 4K resolutions, 60 frames per second, 4:4:4 color space with High Dynamic Range and Wide Color Gamut. "444" extenders from AVPro Edge can distribute that high bandwidth signal over a single standard category cable using ICT (learn more below). 

Our 444 line of extenders includes 40, 70, and 100M HDMI extenders and our 300M fiber extender, key features include: 

  • HDMI 2.0(a/b)
  • 18Gbps Bandwidth Support (Using ICT)
  • Up to 4K60 4:4:4 Support
  • Full HDR Support (HDR 10 & 12 Bit)
  • HDR, HDR10+ and HLG Support
  • Dolby Vision Support
  • 4K  -> 1080P Down-Scaling for Mixed Systems
  • EDID Management and EDID Emulate
  • Built-in Test Patterns for Troubleshooting

18GBPS HDMI EXTENSION USING "ICT"

Category cable's bandwidth is maxed out at 10.2 Gbps, so how do we pass 18Gbps? The answer is "ICT" or Invisible Compression Technology.

ICT is a proprietary compression algorithm we developed by the AVPro team to bypass banding and artifacts you normally get from compressing a video signal. AVPro Edge's sister company Murideo is a display calibration company, so we used the technology we developed in display calibration to ensure you are delivering the most optimized picture you can with any of the "444" HDMI extenders. Depending on the installation, you are sure to find the features you need. Ethernet, power, audio, video, control and USB can all be extended at the same time (USB on the 100 and 40 Plus only). We achieve this using our ICT along side the HDBaseT standard to deliver you the best solution for high bandwidth signals over category cable. Check out the examples below, one without ICT, one with. Pay attention to the artifacts and banding in the example without ICT.

The 444 products also expand into our HDBaseT matrix switchers. Each HDBaseT matrix from AVPro Edge has a "444 Premium" transmitter built in, when you pair that with our "444 RNE" receiver you have full point to point solution for multi-zoned video distribution.

close