The Soundweb London BLU-101 offers a fixed configuration of 12 analog inputs and 8 analog outputs, configurable signal processing, AEC processing, and a high bandwidth, fault tolerant digital audio bus. The BLU-101 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment. The BLU-101 contains dedicated AEC processing for up to 12 independent AEC algorithms. The AEC algorithm can be applied to signals coming from the local analog inputs or from the digital audio bus. 12 individual AEC references (one per algorithm) allow the user to provide a solution for multiple conferencing spaces using a single device. Automatic Gain Control (AGC) and Noise Cancellation (NC) are also provided per AEC algorithm. AGC ensures that microphone levels remain at an optimum level, and NC removes steady state noise (such as from a projector fan or air conditioning device) from the signal path.
This processor features a low latency, fault tolerant digital audio bus of 48 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.
12 Analog Inputs (with 48v Phantom Power per Channel)
8 Analog Outputs
Configurable Signal Processing
12 Channels of AEC Processing with Auto Gain Control and Noise Cancellation
Rich Palette of Processing and Logic Objects
48 Channel, Low Latency, Fault Tolerant Digital Audio Bus
Clear Front Panel LED Indication
Bi-Directional Locate Functionality
12 Control Inputs and 6 Logic Outputs for GPIO Integration
Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
HiQnet Device
Configuration, Control and Monitoring from HiQnet London Architect
Spec Sheet available - Yes
Operating Temperature (Maximum):
95 F
Operating Temperature (Minimum):
41 F
Input Impedance:
3000 ohm
Total Harmonic Distortion + Noise (THD+N):
0.01 %
AC Voltage:
240 Volts
Depth:
12.50 in
Height:
1.75 in
Width:
19 in
Product Weight:
9.10 lbs
Front Panel Led Indicators-Per Input:
Signal Present, CLIP, 48V (Input only)
Front Panel Led Indicators-Other:
COM, STAT, ERR, PWR
Analog Inputs:
12 electronically balanced on Phoenix Combicon removable screw connectors
Mic/Line Inputs:
Nominal gain 0dB, electronically switchable up to +48dB,in +6dB steps
Maximum Input Level:
+20dBu with 0dB input gain,+8dBu with 12dB gain
CMRR:
>75 dB at 1KHz
Input Noise (E.I.N.):
<-125 dBu typical with 150ohm source
Phantom Power:
48 V nominal, selectable per input
A/D Latency:
37/Fs [0.77ms@48k]
Analog Outputs:
8 electronically balanced on Phoenix/Combicon removable screw connectors