The C2N-IO is a very compact device that adds control ports to any Crestron® 2-Series or 3-Series® control system. It connects via the Cresnet® control network and provides one RS-232, one IR, and two relay control ports. It can be mounted to any flat surface using two screws or adhesive reclosable fastener (3M® Dual Lock® included). The C2N-IO is ideally designed for use with a Crestron touch screen control system (TPCS-4SM, TPCS-4SMD, or TSCW-730), providing an advanced wall mount control package that fits in a 2-gang US or UK electrical box. The C2N-IO can be mounted inside the electrical box behind the touch screen, or it can be installed remotely requiring just one Cresnet control cable for power and communications.
Fits within a 2-gang wall box behind the TPCS-4SM(D) or TSCW-730
Provides 1 RS-232, 1 IR/serial, and 2 relay ports [1]
Compatible with any Crestron® 2-Series or 3-Series® control system
Interfaces via the Cresnet® control bus
24Volt DC Cresnet powered
Surface mount bracket included
Systems Controlled - Video
Spec Sheet available - Yes
Operating Temperature (Maximum):
104 F
Operating Temperature (Minimum):
32 F
Depth:
0.83 in
Height:
2.25 in
Width:
3.50 in
Product Weight:
0.17 lbs
Communications:
•Cresnet®: Cresnet slave device, 2-Series and 3-Series® compatible •RS-232: Supports 2-way device control and monitoring up to 115.2k baud with software handshaking [1] •IR/Serial: Supports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to 115.2k baud
Connectors:
•RELAY 1 – 2: (1) 4-pin captive screw terminal block comprising (2) normally open, isolated relay •Rated 1 Amp, 30 Volts AC/DC •Solid-state arc suppression across contacts •COM: (1) 3-pin captive screw terminal block, bidirectional RS-232 port [1] •Up to 115.2k baud; software handshaking support •IR:(1) 2-pin captive screw terminal block, IR/Serial output port •IR output up to 1.2 MHz •1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud •NET:(2) 4-pin captive screw terminal blocks •Cresnet slave ports, paralleled
Controls &Indicators:
•NET ID: (2) Rotary switches for manually setting Cresnet ID, ‘00’ setting enables touch-settable ID (TSID) •PWR: (1) Green LED, indicates operating power supplied via Cresnet control network •NET:(1) Amber LED, indicates communication with Cresnet system •SETUP: (1) Red LED and (1) recessed miniature pushbutton for TSID
Enclosure:
•Metal, freestanding or surface mount, surface mount bracket and 3M® Dual Lock® reclosable fastener included, fits inside a 2-gang electrical box or 2-gang UK (BS 4662) electrical box, 1.38 in (35 mm) minimum internal box depth required for C2N-IO and TPCS-4SM(D) or TSCW-730 combined