Crestron Shades with Brushed Metal Brackets, Manual Clutch Operation
Model: CS-SHADE-ROLLER-MTL-MANUAL
Part #: 6512728
- Intuitive pull-chain control for precise positioning
- Universal mounting brackets allow for inside mount installation to the window jamb or header or outside mount to the window casing, wall, or ceiling
- Small light gaps
- Modern-looking hardware for exposed roller shade systems
- Compact design, takes up less space on mounting surface
The CSA-DECOR3-BRKT-CLUTCH-EC-MTL is a small mounting system that exposes the entire shade, giving the space a contemporary look. The system is very compact, enabling installation in tight spaces. The brushed metal end caps conceal the mounting brackets to provide an exceptionally elegant finish. The easy-to-install and versatile mounting brackets allow the shade to be mounted inside the window opening or on a wall or ceiling.
Clutch-operated shades provide precise pull-chain control for manual shade positioning. Manual shades offer a cost-effective alternative shading solution where motorized shades are unnecessary or not feasible.
For ceiling mounting, the brackets are rotated 90 degrees, leaving a smaller dimensional projection than a wall mount.
Easy Installation
Crestron shades are easy to install. Brackets are easily mounted, and the shade components are secured with no special tools required.
Crestron Design Tool Shades (CDTS) Software
The Crestron Design Tool Shades (CDTS) is a web-based tool used for quoting and ordering Crestron roller shades and drapery tracks. The software may be used to easily create proposals for customers and place orders directly to Crestron.
- Intuitive pull-chain control for precise positioning
- Universal mounting brackets allow for inside mount installation to the window jamb or header or outside mount to the window casing, wall, or ceiling
- Small light gaps
- Modern-looking hardware for exposed roller shade systems
- Compact design, takes up less space on mounting surface
- Metal end caps available in a variety of colors to match any decor
- Universal bracket for both manual and motorized shading solutions
- Smooth and quiet operation
- Field-configurable for left or right side pull chain operation
- Quick and easy installation
- Warranty - Yes
- Spec Sheet available - Yes
- Construction: Metal
- Finish: Chrome, stainless steel, natural aluminum, black nickel, and old brass
- Depth: 3.07 in
- Height: 2.44 in
- Width: 1.10 in
- Warranty (Length/Type): Limited Lifetime
- Shade Control Manual: Operator: Metal bead chain with manual clutch; Gear Ratio: 3:1; Load : 15.6 lb (7.1 kg) max; Pull Force: 5.2 lb. (2.4 kg) max
- Shade Configuration: Shade Width: 8 to 96 in. (204 to 2,439 mm); Bracket-to-Bracket (B2B) width including end caps; Width is dependent upon shade height and fabric selection, Fabric Width: 1.56 in. (39 mm) deduction; Fabric Width = B2B - 1.56 in. (40 mm), Light Gap: Drive Side: 0.79 in. (20 mm), Idler Side: 0.77 in. (19 mm), Tube Diameter: Dia 1.63 in. (42 mm), Roll Up Diameter: 2.5 in. (64 mm)
- Temperature: 32° to 104°F (0° to 40°C)
- Humidity: 10% to 90% RH (noncondensing)
Lee Hartman & Sons
3236 Cove Road NW
Roanoke, VA 24017
USA
(540) 366-3493
http://www.leehartman.com/