DriveRack 220i is the perfect tool for any fixed-install application. With a full complement of processing features and mic/line inputs the DriveRack 220i can provide both system and microphone processing. Featuring the new, patent-pending Advanced Feedback Suppression (AFS) algorithm, equalization, dynamics processing, delay, matrix mixing and band-pass filters, the DriveRack 220i will exceed your expectations. The DriveRack 220i is piloted from the intuitive DriveWare GUI that offers both Configuration and Control of the processing modules. Modules can be accessed, edited and saved as part of programs. Processing modules can be linked between the channels for true stereo processing. If independent processing is desired, parameters can be copied from one channel to the next to ensure that setup is quick and easy. Stored programs can be loaded from either the front panel or from wall mounted zone controllers. Zone controllers can also be used for output muting or adjusting output volumes.
Advanced Feedback Suppression (AFS)
RS-232 PC GUI control
Graphic and parametric EQ
Compressor
Limiter
Noise gating
De-esser
Ducker
Bandpass filters
2x2 matrix mixer
Auto gain control
Security lockout
Wall panel control inputs
UL 6500, IEC 60065, EN 55013, E 60065 safety agency certifications
Warranty - Yes
Spec Sheet available - Yes
Width:
19 in
Height:
1.75 in
Depth:
7.70 in
Number of Inputs:
2
Number of Outputs:
2
Total Harmonic Distortion + Noise (THD+N):
0 %
Maximum Frequency Response (Bandwidth):
20 kHz
Maximum Frequency Response (Bandwidth):
20000 Hz
Minimum Frequency Response (Bandwidth):
20 Hz
Minimum Frequency Response (Bandwidth):
0.02 kHz
Sampling Rate/Frequency:
48 kHz
Sampling Rate/Frequency:
48000 Hz
Sampling Rate/Frequency:
0 Ghz
Dynamic Range:
110 dB
Input Impedance:
50000 ohm
Output Impedance:
120 ohm
AC Voltage:
230 Volts
Analog Input - CMRR:
> 40dB, typically >55db at 1kHz
Analog Input - Mic Pre gain:
30 to 60 dB
Analog Output - Connectors:
Male XLR and Euroblock
Analog Output - Max Output Level:
+20dBu
A/D Type:
dbx Type IV conversion system
Interchannel Crosstalk:
>110dB, 120dB typical
Crosstalk input to output:
>780dB
Certifications:
UL 6500, IEC 60065, EN 55013, E 60065