The DriveRack260 loudspeaker management system has been designed to provide everything you need between the mixer and the power amps. With powerful DSP modules and multiple control surfaces. The 260 provides all the processing and control necessary for both installation and live use. Additionally, the Wizard function enables any user to quickly set up and use the 260 to its full potential by streamlining the setup process and providing a menu based setup procedure that includes system setup and configuration, Auto-EQ, and Advanced Feedback Suppression (AFS) setup. The 260 offers two inputs and six outputs on XLR connectors. Each input channel provides a choice of EQ, either a 9-band Parametric or a 28-band Graphic EQ. Each input channel also boasts two selectable insert processors with a selection of Notch Filtering, classic dbx compression, auto gain control, sub-harmonic synthesis, or our own patent-pending Advanced Feedback Suppression (AFS). The DriveRack 260 also offers a configurable delay with 2.7 seconds of total delay time. The 260 provides full band-pass and crossover filtering and routing including bessel, butterworth and Linkwitz-riley topologies. There is parametric EQ available on each output as well as dbx PeakStopPlus limiting. The 260 provides a full-time RTA for live sound applications, while contractors will appreciate its control inputs for wall-panel logic and volume control.
Feedback eliminator
2.7 seconds of alignment and zone delay
RS-232 PC GUI control
Classic dbx compression and limiting
Graphic and parametric EQ
Auto-EQ function
Full band-pass, crossover and routing configurations
Auto gain control
Pink noise generator and fulltime RTA
Setup wizard with JBL speaker and crown power amplifier tunings
Security lockout
Wall panel control inputs
Warranty - Yes
Spec Sheet available - Yes
Number of Inputs:
3
Number of Outputs:
6
Total Harmonic Distortion + Noise (THD+N):
0 %
Maximum Frequency Response (Bandwidth):
20 kHz
Maximum Frequency Response (Bandwidth):
20000 Hz
Minimum Frequency Response (Bandwidth):
20 Hz
Minimum Frequency Response (Bandwidth):
0.02 kHz
Sampling Rate/Frequency:
48 kHz
Sampling Rate/Frequency:
48000 Hz
Sampling Rate/Frequency:
0 Ghz
Warranty (Length/Type):
2 Years
Certifications:
UL 6500, IEC 60065, EN 55013, E 60065
Dynamic Range:
110 dB
Input Impedance:
40000 ohm
Output Impedance:
120 ohm
Number of Analog Inputs:
Total 3 - (2) Line inputs, (1) RTA Mic input
Analog Input - Connectors:
(2) Female XLR line inputs, XLR RTA Mic input
Analog Input - Type:
Electronically balanced/RF filtered
Analog Input - Impedance:
>40 kiloohms
Analog Input - Maximum input line level:
+30 dBu (With input jumpers in +30 position)
Analog Input - CMRR:
> 45 dB
Analog Input - RTA Mic Phantom Power:
+15Vdc (RTA)
Analog Input - RTA Mic EIN:
< -110dBu, 22Hz-22kHz, 150 Ohms
Analog Output - Connectors:
Male XLR
Analog Output - Type:
Electronically balanced, RF filtered
Analog Output - Impedance:
120 ohms
Analog Output - Maximum Output Level:
+22 dBu
A/D - Type:
dbx Type IV conversion system
A/D - Dynamic Range line:
113dB A-weighted, >110dB unweighted
A/D - Type IV dynamic range:
119dB, A-weighted, 22kHz BW, >117dB, A-weighted, 22kHz BW