Microphone body opens for replaceable battery access, with a battery life of 300 hours
Works with RTA apps by using iPad / iPhone to TRRS to XLR mic cable
30kHz flat frequency response
Ideally suited for on-location acoustical measurements including loudspeaker design and quality control, sound system setup and troubleshooting, room acoustics, or any application where an accurate free-field measurement microphone is required and portabil
Improved version of the SMAARTMICâ„¢ previously offered by EAW
Earthworks has become the accepted standard for affordable, reliable reference and measurement microphones. These microphones are accurate in the time domain and frequency response. Earthworks measurement microphones are optimized for clean, very fast impulse performance to provide accurate wideband response. They have virtually no handling noise and are remarkably stable with respect to temperature and atmospheric conditions. Our M Series measurement microphones are used by SMAARTâ„¢, MLSSAâ„¢, Spectrafooâ„¢, TEFâ„¢ and RTA in addition to acoustic measurement systems manufactured by dbx, DEQX and others. All models are available in matched pairs.
Omni - 9Hz to 30kHz. Designed to work with laptop computers, our battery operated version of the M30 has a built-in switch which provides +6db gain when needed.
Microphone body opens for replaceable battery access, with a battery life of 300 hours
Works with RTA apps by using iPad / iPhone to TRRS to XLR mic cable
30kHz flat frequency response
Ideally suited for on-location acoustical measurements including loudspeaker design and quality control, sound system setup and troubleshooting, room acoustics, or any application where an accurate free-field measurement microphone is required and portabil
Improved version of the SMAARTMICâ„¢ previously offered by EAW
Omnidirectional polar pattern
Flat frequency response, fast impulse response and exceptional polar characteristics
Used by SMAARTâ„¢, MLSSAâ„¢, Spectrafooâ„¢, TEFâ„¢ and RTA in addition to acoustic measurement systems manufactured by dbx, DEQX and others
Meets or exceeds ANSI Type 1 and applicable IEC 61094 requirements
Each M Series microphone is delivered with its own calibration chart providing its individually measured open-circuit sensitivity and the frequency response curve
Electronic Calibration File available
Operating Temp Range: -10 deg C to +40 deg C ( 14 deg. F to 104 deg. F)
Storage Temp Range: -20 deg C to +50 deg C ( -4 deg. F to 122 deg. F)
Made in USA
Microphone Connectivity - Wired
Microphone Type - Condenser
Microphone Type - Electret Condenser
Warranty - Yes
Polar/Pickup Pattern - Omnidirectional
Operating Temperature (Maximum):
104 F
Operating Temperature (Minimum):
14 F
Maximum Frequency Response (Bandwidth):
30000 Hz
Minimum Frequency Response (Bandwidth):
0.01 kHz
Impedance:
600 ohm
Maximum SPL (Sound Pressure Level):
138 dB
Wireless:
No
Depth:
0.86 in
Height:
8.65 in
Color:
Stainless
Warranty (Length/Type):
15 Years
Noise:
22 dBA
Noise:
20 dB
Product Weight:
0.40 lbs
Minimum Frequency Response (Bandwidth):
9 Hz
Maximum Frequency Response (Bandwidth):
30 kHz
Signal to Noise Ratio:
dB
ADP1
- 1/2" calibrator adapter for all M Series measurement mics