Pro AV Catalog
Evertz  - 1216TL
Request Quote
All Products
evertz

16-in Analog Clock with NTP and Back Lighting

Model: 1216TL

  • Automatic detection of 30 Fps or 25 Fps SMPTE LTC timecode input
  • May act as an NTP client when +T option is ordered
  • Three motors for quiet operation and rapid hand setting - sets to time in 10s
  • Automatic Daylight Saving Time adjustment
  • Addressable slave clocks with programmable time offsets of 0 to 23.5 hours in 0.5 hour increments - set via DIP switches, RS-232 control or VistaLINK®
Compare
Project List
Product Info
Tech Specs
Related Products
The 1200T series Analog Clock Displays take master and slave clock technology to new levels of convenience and excellence.The clocks are microprocessor controlled and employ separate direct drive motors for each hand.This means that, as well as being able to set the time almost instantaneously, the new displays are also silent in operation.The hands of the clocks can be programmed to move in sweep mode or in steps.
  • Automatic detection of 30 Fps or 25 Fps SMPTE LTC timecode input
  • May act as an NTP client when +T option is ordered
  • Three motors for quiet operation and rapid hand setting - sets to time in 10s
  • Automatic Daylight Saving Time adjustment
  • Addressable slave clocks with programmable time offsets of 0 to 23.5 hours in 0.5 hour increments - set via DIP switches, RS-232 control or VistaLINK®
  • Accepts date information from LTC User Bits using SMPTE ST 309 or Leitchâ„¢ protocol
  • Master or Slave operation with battery backed up clock
  • Single cable distribution for both power and NTP using IEEE 802.3at Power over Ethernet
  • Optional back lighting of clock face
  • Two sizes 16"
  • Time may be set manually via pushbutton switches, or through the RS-232 serial port, or via VistaLINK®
  • Completely self-setting with NTP, (optioal) SMPTE timecode input or battery back-up
  • Built-in quartz time base oscillator with battery back-up
  • May be configured as a timecode generator to drive other clocks
  • Lighting brightness is adjustable
  • Powered by 12V DC (with 50/60Hz, 100 to 240V AC adapter), or IEEE 802.3at Power over Ethernet
  • 10/100Mbit Ethernet port for NTP and SNMP control/monitoring with VistaLINK® Pro
 
Request Quote