The 7700R16x16 is a small form factor router designed for critical applications where size is limited, whether for existing facilities who have run out of rack space or for trucks and vans. The router is format independent supporting signals from 3Mb/s up to 3Gb/s including SMPTE ST 310, SD-SDI, ASI, HD-SDI and 3G. The 7700R16x16 router is compatible with the existing ranges of Quartz routers, remote control panels and control systems. The 7700R16x16 router is a fully independent stand alone router including an internal Frame Controller module which supports a single Q-Link, dual serial ports and an Ethernet port on the rear of the router. Any panel(s) from the entire range of Quartz remote control panels can be used with the 7700R16x16 router connected via Q-Link or Ethernet. (Exceptions: CP-1024E, CP-2272E). The 7700R16x16 router can be remotely controlled via an external third party control device, such as an automation system, when connected to the router's serial or Ethernet ports .The 7700R16x16 is housed in the typical Evertz 7800FR frame and so can be run with dual power supplies ensuring continuous operation. The 7700R16x16 Router offers a full 3Gb/s bandwidth to handle uncompressed HD signals. Automatic Bit Rate Detection on the input equalizer allows any mix of HD and SD signals in the same unit.
Full broadcast specifications
Powerful built-in control systems
Ethernet, serial RS-422/RS-232 and QLink ports
Full VistaLINK® PRO command & control, SNMP
Output reclocking On/Off
Compatible with all Quartz routers and remote control panels
Monitoring output
Matrix Switcher Video Input Type - Other
Routing Type - Video
Spec Sheet available - Yes
Operating Temperature (Maximum):
104 F
Operating Temperature (Minimum):
32 F
Input Impedance:
75 ohm
Number of Inputs:
16
Number of Outputs:
16
Output Impedance:
75 ohm
AC Voltage (Maximum):
240 Volts
AC Voltage (Minimum):
100 Volts
Active Power:
26 Watt
Serial Video Input Standard:
SMPTE ST 292-1, SMPTE ST 259, SMPTE ST 310, SMPTE ST 424, ASI
Serial Video Input Signal Level:
800 mV p-p nominal
Serial Video Input Return Loss:
15 dB (5MHz - 1485MHz)
Serial Video Input Cable Equalization:
Belden 1855A 300m @ 270MHz, 100m @ 1.5Gb/s
Serial Video Input Connectors:
DIN 1.0/2.3
Serial Video Output Standard:
Same as input (Reclocking)
Serial Video Output Signal Level:
800 mV p-p ±10%
Serial Video Output Return Loss:
15 dB (5MHz - 1485MHz)