The 7707MTA15-HD-W is a HD-SDI, 4 AES, Bi-directional RS-232/RS-422, GPI/O Fiber Transmitter, single fiber, WDM, 1550nm DFB Tx, Rx on 1310nm, VistaLINK®.Supports HD-SDI and SDI video.Supports single-mode and multi-mode fiber optic cable.
Supports HD-SDI and SDI video
Multiplexes up to 4 AES audio, bi-directional RS-232/422, 2 GPI and 2 GPO with HD-SDI or SDI
Supports all SMPTE ST 292-1 (1.485Gb/s) rates/standards
Supports 525/625 line component 4:2:2 SDI @ 270Mb/s
Supports 32, 44.1, 48kHz AES audio inputs
Reclocked video output for additional signal distribution
AES audio inputs can be synchronous or asynchronous to each other and/or to input video
Dolby E compatible
Embedded audio assignment/shuffle from input AES, input groups/channels and internal audio mixers
Four stereo pair mixers allow left/right assignment and summing from input AES and input groups/channels
Adjustable AES delay up to 50ms
Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
Local display of optical signal strength, video, audio and data presence, video format, GPI and GPO status
Automatic coaxial input equalization up to 130m at 1.485Gb/s and 250m at 270Mb/s (Belden 1694A)
Accepts any wavelength in the 1270nm to 1610nm range
Optical output wavelengths of 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
DWDM wavelengths (ITU-T G.694.1 compliant) also available
Supports single-mode and multi-mode fiber optic cable
Fully hot-swappable from front of frame
Fiber Optic Connector Type - Other
Fiber Optic Signals Supported - Other
Spec Sheet available - Yes
Active Power:
9 Watt
DC Voltage:
12 Volts
Regulatory Compliance:
Complies with FCC Part 15 Class A, EU EMC Directive
Serial Digital Video Input Number of Signals:
1
Serial Digital Video Input Standards:
SMPTE ST 292-1 (HD-SDI), SMPTE ST 259-C (SD-SDI), SMPTE305.2M (SDTi)
Serial Digital Video Input Connector:
BNC per IEC 61169-8 Annex A
Serial Digital Video Input Equalization:
Automatic to 100m (typ) @ 1.485Gb/s with Belden 1694A or equivalent cable
Serial Digital Video Input:
Automatic to 250m (typ) @ 270Mb/s with Belden 1694A or equivalent cable
Serial Digital Video Input Return Loss:
> 15dB up to 1.5GHz
Serial Digital Video Output Number of Signals:
1
Serial Digital Video Output Standards:
SMPTE ST 292-1 (HD-SDI), SMPTE ST 259-C (SD-SDI), SMPTE305.2M (SDTi), EN500083-9 (DVB-ASI)
Serial Digital Video Output Connector:
BNC per IEC 61169-8 Annex A
Serial Digital Video Output Signal Level:
800mV nominal
Serial Digital Video Output DC Offset:
0V ±0.5V
Serial Digital Video Output Rise and Fall Time:
150ps nominal @1.485Gb/s
Serial Digital Video Output:
600ps nominal @270Mb/s
Serial Digital Video Output Overshoot:
< 10% of amplitude
Serial Digital Video Output Return Loss:
> 15dB up to 1.5GHz
Serial Digital Video Output High Freq. Jitter:
< 0.2 UI