The 7707VATDxxx-HD is a VistaLINK® capable, fiber optic transmitter for HDTV or SDTV video and AES audio signals. This single card module accepts one HD-SDI or SD-SDI video plus four AES audio and transmits them on a single fiber. The companion 7707VAR-HD receiver converts the HD-SDI and AES back to separate video and audio. The fiber output is available in an assortment of optical wavelengths, accommodating 1310/1550nm, CWDM and DWDM transmission schemes. The 7707VAT-HD occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.
Supports HDTV video formats @ 1.485Gb/s
Supports 525/625 line component 4:2:2 SDI @ 270Mb/s
Supports 32, 44.1, 48kHz AES audio inputs
Dolby Eâ„¢ compatible
AES audio inputs can be synchronous or asynchronous to each other and/or to input video
Reclocked video output for additional signal distribution or monitoring
Signal transport over fiber uninterrupted by loss of video or AES audio input feeds
Comprehensive signal and card status monitoring via four-digit card-edge display, or remotely through SNMP and VistaLINK® capability
Local display of input coaxial cable length equalization
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
Automatic coaxial input equalization up to 130m at 1.485Gb/s (Belden 1694)
Fully Hot-swappable from front of frame
Supports single-mode and multi-mode fiber optic cable
Optical output wavelengths of 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
DWDM wavelengths (ITU-T G.694.1 compliant) also available
Fiber Optic Connector Type - Other
Fiber Optic Signals Supported - Other
Spec Sheet available - Yes
Active Power:
11 Watt
DC Voltage:
12 Volts
Regulatory Compliance:
Class 1 laser product, 24CFR 1040.10 and 1040.11, IEC 60825-1, FCC Part 15, Class A, EU EMC Directive (EMI/RFI)
Serial Video Input Number of Inputs:
1
Serial Video Input Connector:
BNC per IEC 61169-8 Annex A
Serial Video Input Equalization:
Automatic to 75m @ 1.485Gb/s and 300m @ 270Mb/s with Belden 1694 or equivalent cable
Serial Video Input Return Loss:
> 15dB up to 1.485Gb/s
Serial Video Output Number of Outputs:
1 reclocked
Serial Video Output Connector:
BNC per IEC 61169-8 Annex A
Serial Video Output Signal Level:
800mV nominal
Serial Video Output DC Offset:
0V ±0.5V
Serial Video Output Rise/Fall Time:
< 270ps for HD-SDI, < 900ps for SDI
Serial Video Output Overshoot:
< 10% of amplitude
Serial Video Output Return Loss:
> 15dB up to 1.485Gb/s
Serial Video Output Wideband jitter:
< 0.2UI
AES Audio Input Balanced:
AES3-2003
AES Audio Input Unbalanced:
SMPTE ST 276
AES Audio Input Number of Inputs:
4
Standard:
12 pin removable terminal strip
-U Version:
BNC per IEC 61169-8 Annex A
Sampling Rate:
32, 44.1, 48kHz
Resolution:
Up to 24 bits
Minimum Input:
200mV p-p
Equalization Balanced:
< 600m @ 48kHz, with Belden 1800B, and 2V p-p source signal
Equalization Unbalanced:
< 1200m @ 48kHz, with Belden 8281, and 1V p-p source signal
Impedance Balanced:
110 ohm
Impedance Unbalanced:
75 ohm
Return Loss:
> 15dB, from 1MHz to 6MHz
Alignment Jitter:
< 10ns p-p, with conditions of minimum to maximum cable length
Optical Output Number of Outputs:
1
Optical Output Connector:
Female SC/PC, ST/PC or FC/PC