The 7725VBI-K-HD module is a multi-function VBI keyer. Every program input vertical interval video line can be programmed to pass upstream video, blank the line, insert any VBI line from the HD/SDI Key Fill input, insert a selectable VITS (vertical interval test signal) for SD, and insert a Wide Screen Signaling (WSS) and Active Format Description (AFD). The 7725VBI-K-HD allows for up to 70 lines to be programmed. The module provides the capability to store different VBI configurations as presets and recall them from the On-Screen Display or via 8 opto-isolated GPI inputs. The 7725VBI-K-HD has two re-clocked program outputs and one program monitor output. This unit is often used in critical on-air applications and hence bypass relay protection of the program video path is provided. The 7725VBI-K-HD is setup via the On-Screen Display or VistaLINK®. VistaLINK® enables remote monitoring, control, and configuration capabilities via Simple Network Management Protocol (SNMP). This offers the flexibility to manage operations including signal monitoring and module configuration from SNMP enabled control systems (Manager or NMS) locally or remotely.
One serial digital 1.5Gb/s HD input per SMPTE ST 292-1, or 270Mb/s SD input per SMPTE ST 259-C
Two reclocked HD or SD program outputs
Video input relay bypass for power failure bypass protection
One HD input or SD input digital Key video input
One HD or SD monitor program output with On-Screen Display
A comprehensive on screen menu is available to configure the various features of the module
128 different presets for storing VBI keying configurations
Up to 16 line patterns may be captured from any key input line and stored in User Memories for later insertion on any VBI line
Up to 70 lines of output video can be programmed
Each line of VBI independently programmable to pass, blank, insert from key signal, insert from user memory or insert favtory test signal
On Air Preset configuration selected with GPI, OSD, or VistaLink® selection
Non-volatile memory protects current configuration in case of power loss
Fully hot swappable from front of frame
VistaLINK® capable for remote monitoring and control via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
Required Computer Operating Systems - Windows Vista
Spec Sheet available - Yes
Serial Video Input - Standard:
Auto-detect SMPTE 2ST 292 (1080i/59.94, 1080i/60, 1080i/50, 1080p/23.98, 1080p/23.98sF, 720p/59.94, 720p/60 and 720p/50), SMPTE ST 259-C (525i/59.94, 625i/50)
Serial Video Input - Number of inputs:
1 for Program video (PGM), 1 for Key signal to insert (FILL), PGM and FILL need to be synchronous and timed w.r.t. each other (±1/2 line)
Serial Video Input - Connector:
BNC per IEC 61169-8 Annex A
Serial Video Input - Equalization:
Automatic 100m (min) @ 1.5Gb/s with Belden 8281 or equivalent cable
Serial Video Input - Return Loss:
>15 dB (PGM input)
Serial Video Output - Number of outputs:
(re-clocked from program, 1 bypass protection) same as input 1 (program monitor) same as input
Serial Video Output - Connector:
BNC per IEC 61169-8 Annex A
Serial Video Output - Signal Level:
800 mV nominal
Serial Video Output - DC offset:
0±0.5 V
Serial Video Output - Rise/Fall Time:
200 ps nominal
Serial Video Output - Overshoot:
<10% of amplitude
Serial Video Output - Return Loss:
>15 dB
Serial Video Output - Wideband Jitter:
<0.20 UI
General Purpose Inputs/Outputs - Number of Outputs:
8
General Purpose Inputs/Outputs - Type:
Opto-isolated active low with internal pull-ups to +5V or +12V (jumper settable)
General Purpose Inputs/Outputs - Connector:
Female DB-9
General Purpose Inputs/Outputs - Input Signal:
Closure to ground
Electrical Power -:
9.5 Watts
Physical - Number of Slots:
1
DC Voltage:
12 Volts
Regulatory Compliance:
Complies with FCC Part 15 Class A, EU EMC Directive