The EQT with clean switch and Evertz patented SoftSwitch™ technology is the perfect routing solution for mission critical applications. The EQT provides four clean and quiet outputs that allow seamless video and quiet embedded audio switching. There are also TWENTY additional outputs that can be used as auxiliary outputs for normal routing functions. The four clean and quiet video paths have line synchronizers to accommodate differences in timing up to approximately ±one half line providing clean video switches on the output. The embedded audio on the video bus uses Evertz patented SoftSwitch™ technology to eliminate audible pops when switches are performed. Embedded SoftSwitch™ is performed on all 4 audio groups or 16 channels. The EQT is ideal for use in master control applications as a bypass router. With four clean and quiet paths fully protected with relays, even the worst on-air disasters can be avoided. For cost sensitive applications, the EQT can also be used as a simple master control switcher. Being format independent data paths the EQT supports digital signals from 3Mb/s all the way up to 3Gb/s including SD-SDI, HD-SDI, 3G-SDI, DVB-ASI, and SMPTE 310M (clean and quiet paths only support SD-SDI and HD-SDI).
Units can be genlocked to an external source so that a "clean switch" can be achieved
Embedded SoftSwitchâ„¢ technology eliminates hot-switch audio pops on embedded audio
Embedded SoftSwitchâ„¢ is performed on all 4 audio groups or 16 channels
Front panel or remote control panel options available
Bypass relay protection on clean and quiet outputs
Optional Redundant power supply
Output reclocking (On/Off)
Full VistaLINK® PRO command & control, SNMP
Ethernet, Serial RS-232/RS-422 and Q-Link ports
Matrix Switcher Video Input Type - HD-SDI
Matrix Switcher Video Input Type - Other
Routing Type - Video
Spec Sheet available - Yes
Operating Temperature (Maximum):
104 F
Operating Temperature (Minimum):
32 F
Input Impedance:
75 ohm
Output Impedance:
75 ohm
AC Voltage (Maximum):
240 Volts
AC Voltage (Minimum):
100 Volts
Active Power:
60 Watt
Depth:
18.75 in
Height:
1.75 in
Width:
19 in
Product Weight:
15 lbs
Number of Inputs:
32
Number of Outputs:
4
Serial Video Inputs Standard:
SMPTE 292M, SMPTE 259M, SMPTE 310M, SMPTE424M, DVB-ASI
Serial Video Inputs Signal Level:
800mV p-p nominal
Serial Video Inputs Return Loss:
15 dB (5 - 1485MHz)
Serial Video Inputs Cable Equalization:
Belden 1694A 300m @ 270MHz, 100m @ 1.5Gb/s
Serial Video Inputs Connectors:
DIN1.0/2.3
Serial Video Output Standard:
Same as input (Reclocking) (SMPTE 310M, SMPTE 424M, DVB-ASI supported on auxiliary outputs only)
Serial Video Output Signal Level:
800mV p-p ±10%
Serial Video Output Return Loss:
15 dB (5 - 1485MHz)