Configuration - The EQT is housed in a 1RU frame and switches 32 sources to 24 destinations. The input stage of the EQT is fixed at 32 and the output stage is fixed at 24
Control - The EQT-3224 includes a powerful front router control panel and is compatible with the existing ranges of Quartz routers, remote control panels and control systems
The EQT router includes, as standard, an internal frame controller module which supports a single Q-Link, a single serial port and a single Ethernet port on the rear of the router
Remote Control Panel - Any panel(s) from the entire range of Quartz remote control panels can be used with the EQT router connected via Q-Link or Ethernet. (Exceptions: CP-1024E, CP-2272E, CP-1040E)
External Third Party Control • The EQT router can be remotely controlled via an external third party control device, such as an automation system, when connected to the serial port or Ethernet via quartz protocol
The EQT is a routing solution for applications demanding signal integrity and density. The EQT-3224 has the ability to route up to 32x24 signals in a compact 1RU frame with a local front panel for easy access to all sources and destinations through hot keys AND scrolling lists. Being format independent, the EQT supports digital signals from 3Mb/s all the way up to 3Gb/s including SD-SDI, HD-SDI, 3G-SDI, DVB-ASI, SMPTE310M. All this performance and optional redundant power supplies, plus the ability to host additional router panels or be controlled via Magnum makes the EQT unmatched in density and flexibility.
Configuration - The EQT is housed in a 1RU frame and switches 32 sources to 24 destinations. The input stage of the EQT is fixed at 32 and the output stage is fixed at 24
Control - The EQT-3224 includes a powerful front router control panel and is compatible with the existing ranges of Quartz routers, remote control panels and control systems
The EQT router includes, as standard, an internal frame controller module which supports a single Q-Link, a single serial port and a single Ethernet port on the rear of the router
Remote Control Panel - Any panel(s) from the entire range of Quartz remote control panels can be used with the EQT router connected via Q-Link or Ethernet. (Exceptions: CP-1024E, CP-2272E, CP-1040E)
External Third Party Control • The EQT router can be remotely controlled via an external third party control device, such as an automation system, when connected to the serial port or Ethernet via quartz protocol
Expansion - The input stage of the EQT is fixed at 32 and the output stage is fixed at 24
Power Supply - The power supply for the EQT router is internal. The EQT router can be fitted with an optional redundant internal power supply
The EQT router offers a full 3Gb/s bandwidth
Included front control panel
Dense cost effective design
Full 3Gb/s design
Redundant power supply
Output reclocking (On/Off)
Full VistaLINK® PRO command & control, SNMP
Ethernet, Serial RS-232/RS-422, and Q-Link ports
Matrix Switcher Video Input Type - HD-SDI
Matrix Switcher Video Input Type - Other
Routing Type - Video
Spec Sheet available - Yes
Operating Temperature (Maximum):
104 F
Operating Temperature (Minimum):
32 F
Input Impedance:
75 ohm
Number of Inputs:
32
Number of Outputs:
24
Output Impedance:
75 ohm
Depth:
11.20 in
Height:
1.75 in
Width:
19 in
Product Weight:
13.23 lbs
AC Voltage (Maximum):
240 Volts
AC Voltage (Minimum):
100 Volts
Active Power:
60 Watt
Serial Video Input Standard:
SMPTE ST 292-1, SMPTE ST 259-1, SMPTE ST 310-1, SMPTE ST 424-1, ASI
Serial Video Input Signal Level:
800mV p-p nominal
Serial Video Input Return Loss:
15 dB (5MHz - 1485MHz)
Serial Video Input Cable Equalization:
Belden 1694A 300m @ 270MHz, 100m @1.5Gb/s
Serial Video Input Connectors:
DIN1.0/2.3
Serial Video Output Standard:
Same as input (Reclocking)
Serial Video Output Signal Level:
800mV p-p ± 10%
Serial Video Output Return Loss:
15 dB (5MHz - 1485MHz)