The EQT is a routing solution for mission critical applications. Its revolutionary design provides 100% redundancy and easy access to all components for quick replacement, minimizing down time. With this, and the ability to route up to 32x32 signals in a compact 2RU frame, the EQT is ideal for all mission critical and demanding 24/7 environments. Being format independent data paths the EQT supports digital signals from 3Mb/s all the way up to 3Gb/s including SD-SDI, HD-SDI, 3G-SDI, DVB-ASI, SMPTE ST 310. The EQT router is compatible with the existing ranges of Quartz routers, remote control panels and control systems. The EQT router includes, as standard, an internal frame controller module which supports a single Q-Link, a single serial port and a single Ethernet port on the rear of the router. The input and output stage of the EQT is fixed at 32 in the coaxial version and expandable in blocks of 2 in the fiber version. It can not be expanded beyond it's frame size. The EQT router offers a full 3Gb/s bandwidth to handle uncompressed HD signals. In addition, automatic bit rate detection on the input equalizer allows any mix of 3G, HD and SD signals in the same unit. All outputs are reclocking and user configurable.
Full modular design
All modules are hot swappable
All components are front accessible
Redundant power supply
Output reclocking (On/Off)
Full VistaLINK® PRO command & control, SNMP
Ethernet, Serial RS-232/422, and Q-Link ports
Matrix Switcher Video Input Type - Other
Routing Type - Video
Spec Sheet available - Yes
Operating Temperature (Maximum):
104 F
Operating Temperature (Minimum):
32 F
Input Impedance:
75 ohm
Number of Inputs:
32
Number of Outputs:
32
Total Harmonic Distortion + Noise (THD+N):
75 %
AC Voltage (Maximum):
240 Volts
AC Voltage (Minimum):
100 Volts
Active Power:
200 Watt
Depth:
10.30 in
Height:
3.50 in
Width:
19 in
Serial Video Input Standard:
SMPTE ST 292-1, SMPTE ST 259, SMPTE ST 310, SMPTE ST 424, ASI
Serial Video Input Signal Level:
800mV p-p nominal
Serial Video Input Return Loss:
15 dB (5MHz - 1485MHz)
Serial Video Input Cable Equalization:
Belden 1694, 300m @ 270MHz, 100m @ 1.5Gb/s
Serial Video Input Connectors:
BNC per IEC 61169-8 Annex A
Serial Video Output Standard:
Same as input (Reclocking)
Serial Video Output Signal Level:
800 mV p-p ±10%
Serial Video Output Return Loss:
15 dB (5MHz - 1485MHz)
Serial Video Output DC Offset:
0 ±0.5 V
Serial Video Output Connectors:
BNC per IEC 61169-8 Annex A