Signal Processing Systems : Related Signal Processing Products : Jensen Transformers, Inc. - CI-2RR

Dual Audio Ground Isolator

Model: CI-2RR

Eliminates the inherent ground noise coupling mechanism
Common-mode ground noise rejection of 95dB at 60Hz
Wide bandwidth -3dB at 0.25Hz and 50kHz
Handles signals up to 7V at 20Hz or 11V at 30Hz
Input impedances are 49kohms when driving typical 47kohms inputs

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Dual audio ground isolator, when used in unbalanced audio consumer interfaces, this isolator not only eliminates hum and buzz but also enhances audio quality by reducing spectral contamination, due to ultrasonic and RF interference. To avoid excessive high frequency losses, no more than 3 feet of cable should be used on its outputs.

Eliminates the inherent ground noise coupling mechanism
Common-mode ground noise rejection of 95dB at 60Hz
Wide bandwidth -3dB at 0.25Hz and 50kHz
Handles signals up to 7V at 20Hz or 11V at 30Hz
Input impedances are 49kohms when driving typical 47kohms inputs

Spec Sheet available - Yes

Input Impedance: 48.6 kohms (100Hz, -10dBu, test circuit 1)
Insertion Loss: 0.82 dB (1kHz, +4dBu, test circuit 1)
Deviation from linear phase (DLP): +1.4/-0 ° (10Hz to 2kHz, -20dBu, test circuit 1)
Distortion (THD): 0.04 % (20Hz, -10dBu, test circuit 1)
Maximum 20Hz input level: -19 dBu (1% THD, test circuit 1)
Common-mode rejection ratio (CMRR): 95 dB (60Hz, test circuit 2)
Output Impedance: 4.65 kohms (1kHz, test circuit 1)
Input DC Resistances: 2.26 kohms
Output DC Resistances: 1.90 kohms
Capacitances at 1kHz: 105 pF (1kHz, input to output)
Allowable Source Impedance: 600 ohms (output impedance of device driving the ISO-MAX input)
Allowable Load Impedance: 47 kohms (input impedance of device loading the ISO-MAX output)
Operating Temperature (Maximum): 158 F
Operating Temperature (Minimum): 32 F