Signal Processing Systems : Audio Transformers : Jensen Transformers, Inc. - JT-10KB-D

Ultra-High Performance Step-down Line Input Transformer

Model: JT-10KB-D

Ideal passive Pro to Consumer level converter
Wide bandwidth -3dB at 0.5Hz and 180kHz
Recommended for levels up to +21dBu at 20Hz
High input impedance of 40kohm
High common-mode rejection of 120dB at 60Hz

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Line input transformers provide the maximum possible Common Mode Rejection of unwanted signals. All models have a single Faraday shield and a 30dB magnetic shield can. Models are available in 1:1, 1:1.4, 1:2, 2:1 and 4:1 ratios.

Ideal passive Pro to Consumer level converter
Wide bandwidth -3dB at 0.5Hz and 180kHz
Recommended for levels up to +21dBu at 20Hz
High input impedance of 40kohm
High common-mode rejection of 120dB at 60Hz

Audio Transformer Type - Input Transformer
Audio Transformer Type - Line Transformer
Spec Sheet available - Yes

Operating Temperature (Maximum): 158 F
Operating Temperature (Minimum): 32 F
Maximum Bandwidth: 180 kHz (-3dB)
Impedance Ratio: 40k:2.4k
Input Impedance: 41.5 kohm (1kHz, +4dBu, test circuit 1)
Voltage Gain: -12.9 dB (1kHz, +4dBu, test circuit 1)
Magnitude response, ref 1 kHz: -0.04 (20Hz, +4dBu, test circuit 1, Rs=600ohm) and -0.03 (20kHz, +4dBu, test circuit 1, Rs=600ohm) dB
Deviation from linear phase (DLP): +0.6/-0.1 degree (20Hz to 20kHz, +4dBu, test circuit 1, Rs=600ohm)
Distortion (THD): <0.001 (1kHz, +4dBu, test circuit 1, Rs=600ohm) and 0.015 (20Hz, +4dBu, test circuit 1, Rs=600ohm) %
Maximum 20Hz input level: +21 dBu (1% THD, test circuit 1, Rs=600ohm)
Common-mode rejection ratio (CMRR) 50ohm balanced source: 120 (60Hz, test circuit 2) and 85 (3kHz, test circuit 2) dB
Common-mode rejection ratio (CMRR) 600ohm unbalanced source: 90 (60Hz, test circuit 3) and 55 dB (3kHz, test circuit 3)
Output Impedance: 225 kohm (1kHz, test circuit 1, Rs=600ohm)
Primary DC resistances: 2.5 kohm (RED to BRN)
Secondary DC resistances: 92 kohm (YEL to ORG)
Capacitance at 1kHz: 120 (primary to shield and case) and 115 (secondary to shield and case) pF
Turns Ratio: 4.000:1
Breakdown Voltage: 250 Vrms (primary or secondary to shield and case, 60Hz, 1 minute test duration)