Pro AV Catalog
6 Route 173 West
Clinton, NJ 08809
United States
Project List
Kramer Introduces New Twisted Pair Transmitter and Receiver
Posted on Tuesday, March 24, 2009
Kramer Introduces New Twisted Pair Transmitter and Receiver

 

New additions to Kramer TOOLS™ Line Send and Receive Computer Graphics Video, Audio and RS-232 Signals
 
Hampton, New Jersey– March 24, 2009 – Kramer Electronics, a worldwide supplier of innovative and reliable signal management products, announced the introduction of the TP-125 computer graphics video, audio and RS-232 over twisted pair transmitter and the TP-126 computer graphics video, audio and RS-232 over twisted pair receiver. The two units join the company’s TOOLS line of compact solution products.  
 
Ideal for presentation and multimedia applications, the TP-125 and TP-126 are designed for long-range computer graphics video, audio and RS-232 control data distribution in schools, hospitals, and security and retail applications. Twisted pair technology allows cost-effective, high resolution video, audio and other signals to travel over long distances. 
 
The TP-125 transmitter converts computer graphics video, unbalanced stereo analog audio and RS-232 control commands to a twisted pair signal, and transmits them over CAT 5 type twisted pair cable to the TP-126 receiver. The stereo analog audio signal is converted into a digital audio stream before transmitting; preserving the signal source quality. 
 
The TP-126 receiver converts the twisted pair signal back into computer graphics video, unbalanced stereo analog and RS-232 control signals. The TP-126 provides simultaneous unbalanced analog stereo and S/PDIF (24-bit, 48kHz) digital audio output derived from the original unbalanced stereo analog audio signal. The RS-232 signal capability of these models allows for bi-directional data flow, allowing status requests and control of virtually any device over a transmission range of more than 330 feet (100 meters).
 
The products support resolutions up to WUGXA (1920 x 1200), are HDTV compatible while offering a system range of up to 330 feet (100 meters). The TP-126 offers level (gain) and EQ (peaking) control for the computer graphics video signal. It also has the capability to change the polarity of H and V Sync.
 
The TP-125 transmitter offers one computer graphics video input on a 15-pin HD connector and one audio analog 3.5mm mini jack input, along with one RJ-45 output connector. The TP-126 offers one RJ-45 input connector, and one computer graphics video output on a 15-pin HD connector. Audio outputs on the TP-126 include an RCA connector for S/PDIF digital audio and a 3.5mm mini jack connector for unbalanced stereo analog audio. The units have an audio bandwidth of 20Hz – 20kHz @.05dB and a signal to noise ratio of <-80dB.
 
The TP-125 transmitter and the TP-126 receiver are available through authorized Kramer Electronics resellers worldwide. The TP-125 and TP-126 each have a U.S. list price of $495. Complete production information may be found at www.kramermatrix.com .
close

Need help with your upcoming event?

This website uses cookies so we can provide the most useful and relevant experience!