The TP-581T is a high-quality twisted pair transmitter for HDMI, Ethernet 100BaseT, bidirectional RS-232 and IR signals. The TP-581T takes the HDMI input, and converts it with the Ethernet 100BaseT, RS-232 and IR input signals to a twisted pair signal. The TP-582R converts the twisted pair signal back to Ethernet 100BaseT, RS-232, IR and two HDMI outputs, and de-embeds the audio to S/PDIF and TOSLINK audio outputs.
Max. Data Rate -Â 2.25Gbps
HDBaseT Technology
HDTV Compatible
HDCP Compliance
HDMI Support -Â Deep Color, x.v.Colorâ„¢, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD, CEC
3D Pass-Through
EDID PassThru -Â Passes EDID signals between the source and display
Bidirectional RS-232 Interface -Â Commands and data can flow in both directions via the RS-232 interface, allowing status requests and control of the destination unit
Ethernet Interface -Â Passes 100BaseT
System Range -Â Up to 100m (330ft)
Cable -Â Requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer's BC-DGKat524, BC-DGKat623 and BC-DGKat7a23 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The
Control -Â Front panel
Indicators -Â Status LEDs for input selection, output, link and power
Compact MegaTOOLS® - 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-T2B universal rack adapter
HDBaseT - Yes
Receiver/Transmitter Cable Type - Twisted Pair
Receiver/Transmitter Format Type - HDMI
Receiver/Transmitter Format Type - IR
Receiver/Transmitter Format Type - Other
Spec Sheet available - Yes
Depth:
4.50 in
Height:
1 in
Width:
7.40 in
Current Draw:
0.80 Amps
DC Voltage:
5 Volts
Product Weight:
1.40 lbs
Inputs:
1 HDMI connector, 1 IR on a 3.5mm mini jack, 1 Ethernet 100BaseT on an RJ-45 connector, 1 RS-232 on a 9-pin D-sub connector
Outputs:
1 RJ-45 connector
Bandwidth:
Supports up to 2.25Gbps bandwidth per graphic channel
COMPLIANCE WITH HDMI STANDARD:
Supports HDMI and HDCP