Exceptional fidelity and power capability in an ultra-compact package
Wide, symmetrical pattern covers broad listening areas
Unique crossover design eliminates combing for consistent midrange response
Titanium dome driver delivers exceptionally smooth high-frequency characteristic
Applications: Front and under-balcony fill, Theatrical sound reinforcement, Portable and installed audio-visual systems, Cinema surround sound and effects, Compact voice reinforcement systems
The UPM-1P is a remarkably compact, self-powered professional sound reinforcement loudspeaker system. It is ideally suited to applications requiring a relatively small and inconspicuous loudspeaker that can also provide high sound pressure levels, extremely low distortion, and uniform directional control. The UPM-1P loudspeaker provides vocal-range reinforcement as a small PA system, or as a fill or delay loudspeaker in larger indoor or outdoor systems. A full-range system can be created with the addition of an optional subwoofer. The UPM-1P high-frequency section comprises a 1-inch metal dome tweeter on a symmetrical constant-directivity high-frequency horn with 100-degree beamwidth. At lower frequencies, sophisticated phase-correction circuitry assures true point-source performance without the off-axis cancellation effects that plague customary dual-woofer designs. Two 5-inch low-frequency cone drivers are driven in parallel at low frequencies to take advantage of their combined acoustic output. To prevent destructive interference and comb filtering effects in the mid-band frequencies close to the crossover area, one of the drivers rolls off above 320 Hz. Two channels of power amplification are provided (350 watts total), along with an active crossover, driver protection voltage limiters, and frequency- and phase-response alignment circuitry. A laser-trimmed differential input stage affords superior common-mode rejection to allow long signal runs through shielded twisted-pair cable. The standard UPM-1P is switchable between the 115 V AC and 230 V AC ranges. A 100 V AC version is also available. The UPM-1P's integral power supply suppresses high-voltage transients, while two PowerCon AC connectors facilitate AC looping. The rugged cabinet is coated with a textured black finish. Mounting is via three 3/8"-16 or metric M10 threaded recessed nut plates. Optional U-bracket, yoke, and pole-mount hardware is available. The UPM-1P loudspeaker can be supplied with either the standard audio input module incorporating looping XLR connectors, or an alternate that adds attenuation and a polarity switch. The UPM-1P easily integrates with the RMS remote monitoring system network and software (optional). RMS displays signal and power levels, driver status, limiter activity, and amplifier temperature on a remote Windows computer.
Exceptional fidelity and power capability in an ultra-compact package
Wide, symmetrical pattern covers broad listening areas
Unique crossover design eliminates combing for consistent midrange response
Titanium dome driver delivers exceptionally smooth high-frequency characteristic
Applications: Front and under-balcony fill, Theatrical sound reinforcement, Portable and installed audio-visual systems, Cinema surround sound and effects, Compact voice reinforcement systems
Horizontal Symmetry - Yes
Vertical Symmetry - Yes
Spec Sheet available - Yes
Width:
6.85 in 169 mm
Height:
18 in 458 mm
Depth:
7.70 in 196 mm
Speaker Diameter (Driver):
5 in
Maximum Frequency Response (Bandwidth):
16 kHz
Maximum Frequency Response (Bandwidth):
16000 Hz
Minimum Frequency Response (Bandwidth):
80 Hz
Minimum Frequency Response (Bandwidth):
0.08 kHz
Coverage Horizontal:
100 degrees
Coverage Vertical:
100 degrees
Horizontal Symmetry:
Yes
Impedance (High Frequency):
8 ohm
Impedance (Low Frequency):
8 ohm
Maximum SPL (Sound Pressure Level):
123 dB
Power Handling (High Frequency):
20 Watt
Power Handling (Low Frequency):
200 Watt
Sensitivity:
0 dB
Vertical Symmetry:
Yes
AC Voltage:
230 Volts
Current Draw:
0.50 Amps
Product Weight:
21 lbs
Color:
Black
Operating Frequency Range:
75 Hz - 20 kHz Recommended maximum operating frequency range. Response depends on loading conditions and room acoustics