The HTE-T III 4K-HDR HDMI Extender over Single Cat.X with HDBaseT, RS-232, Bi-directional IR, Ethernet, PoC and ARC boosts up your video/audio transmission distance to 100m (330ft) in HDTV 1080p with 36-bit color depth and 70m (230ft) at 4K-HDR. With the advanced design for the latest HDMI 2.0a technology, deep color video, DTS-HD or Dolby TrueHD audio, and HDCP 2.2 supports and compatibility are all further insured.
HDMI 2.0a compliant
4K2K at 60 4:4:4 8bits
HDR 4K2K at 60 4:2:0 10bits
Extends HDMI signal up to 100m (330ft) from the HDMI source at Full HD 1080p 36-bit, 70m (230ft) at 4K2K at 60 444 (4K-HDR Technology)
PoC (Power over Cable) which can power both units from TX or RX side with power supply
ARC on transmitter & receiver unit
HDCP & EDID Bypass
CEC support
Auto equalization
Pure unaltered uncompressed 7.1ch digital HDMI over Cat.5/5e/6 cable transmission
DTS-HD Master Audio and Dolby TrueHD high bit rate audio support
Full frequency IR signal from 20KHz to 60KHz
Bi-directional IR path-through
Integrated port for LAN/network device
Full Duplex RS-232 control up to 115,200 bps through connector
Wall mounting housing design for easy and robust installation
Video latency less than 20 ms.
Spec Sheet available - Yes
Compliance:
HDMI 2.0a
Video Support:
HDR 4K2K at 60 (4:2:0 10bits) / 4K2K at 60 (4:4:4 8bits)
Input TMDS signal:
1.2 Volts [peak-to-peak]
Equalization:
Auto
Input DDC Signal:
5 Volts [peak-to-peak, TTL]
ESD Protection:
Human body metal - + 15kV [air-gap discharge] & +8kV [contact discharge]
IR Pass-Thru:
Bi-directional
PCB stack-up:
6-layer board [impedance control – differential 100ohm; single 50ohm)
PoC SUPPORT:
Yes
RS-232 Support:
Yes
HDMI Connector:
Type A [19-pin female]
HDMI Source Control:
Controllable via IR pass-through from RX to TX with IR extenders
RJ-45 connector:
WE/SS 8P8C (Reverse Mode)
MIN DIN CONNECTOR:
DIN-9
3.5mm Connector:
TX: IR receiver / IR blaster, RX: IR receiver / IR blaster