D21 MultiFeed distributes one word clock signal to six outputs, and up to four different AES/EBU signals to 16 outputs. In every professional digital environment two tasks must be solved: The distribution of some AES/EBU signals, and the distribution of a synchronization signal. For this reason, two distribution amplifiers are integrated in the Studer D21 MultiFeed. One is dedicated to wordclock distribution, 1 input to 6 outputs. The other one allows AES/EBU signal distribution with flexible configurability: Up to 4 inputs can feed up to 16 outputs. For AES/EBU I/O the sampling frequency range is 30 to 200 kHz. Wordclock inputs/outputs are on BNC sockets, input sensitivity is 1 Vpp. The polarity of three of the WCLK outputs may be inverted with an internal jumper. AES/EBU inputs/outputs on 15-pin D-type male connectors. The vital significance of a distributor in a digital system is obvious, redundancy therefore is a must. Either a redundant power supply or a second Studer D21 MultiFeed linked for full redundancy – both with optical feedback – can be ordered as options.
AES inputs and outputs are available on 15-pin D-type connectors
Wordclock inputs/outputs are on BNC sockets
Two distribution amplifiers are integrated
Input sensitivity is 1 Vpp, regardless of any DC level
Possible to install a second, redundant power supply into a single distributor unit
Automatic switchover to the corresponding redundant input takes place if one or more of the main inputs do not receive a valid AES/EBU signal
AC Voltage:
240 Volts
Product Weight:
11.02 lbs
AES/EBU Impedance:
110 ohm (typical)
AES/EBU Sampling rate:
30 to 200 kHz
AES/EBU Sensitivity:
0.2 V (p to p)
Word Clock Input Impedance:
hi-Z or 75 ohm (jumper)