Automatic voltage regulation (AVR) corrects brownouts and overvoltages from 83 to 147V
NEMA 5 to 15P input plug, 8 NEMA 5 to 15R output receptacles, 2 independently switchable output load banks
Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages
High 97% full load efficiency rating offers reduced power consumption and BTU emissions
Extended runtime is available with optional BP36V15-2U (limit 1) or BP36V42-3U (no limit), output is reduced to 1200W maximum with external battery packs
1kVA line interactive sine wave UPS with extended-run and SNMPWEBCARD options. Enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Built-in auto-voltage regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Unique configuration excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight undervoltages and severe brownout conditions.
Automatic voltage regulation (AVR) corrects brownouts and overvoltages from 83 to 147V
NEMA 5 to 15P input plug, 8 NEMA 5 to 15R output receptacles, 2 independently switchable output load banks
Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages
High 97% full load efficiency rating offers reduced power consumption and BTU emissions
Extended runtime is available with optional BP36V15-2U (limit 1) or BP36V42-3U (no limit), output is reduced to 1200W maximum with external battery packs
Hot-swappable, user-replaceable internal batteries and external battery packs can be replaced with no disruption to connected equipment
Front panel LCD monitoring screen with mode and enter buttons reports operating mode with 5-bar battery charge graphic, plus 7 selectable screens of detailed UPS and site power information
LCD interface also supports a number of advanced user setup and operating preferences
Built-in USB, RS-232 and SNMPWEBCARD accessory monitoring options
HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
Built-in emergency power off (EPO) interface with cable
Warranty - Yes
Rackmountable - Yes
UL Rated - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
104 F
Operating Temperature (Minimum):
32 F
Cord Length (in/mm):
120 in
Estimated Runtime:
6.30 minutes
Output volt amp capacity:
1000 VA
Output kVA Capacity:
1 kVA
Output Watt Capacity:
900 W
Nominal Output Voltage (Supported):
120 V
Frequency Compatibility:
60 Hz
Built-in UPS output receptacles:
8 x 5 to 15R outlets
Rated input current (at maximum load):
9.2 A
Nominal Input Voltage (Supported):
120 VAC
Input Connection Type:
5 to 15P
Battery Full Load Runtime:
6.3 minutes (900W)
Battery Half Load Runtime:
18 minutes (450W)
DC Battery System Voltage:
36 VDC
Primary Form Factor:
Rackmount
Shipping Dimensions:
9 x 23.5 x 23.5 inches
UPS housing material:
Steel
Cooling Method:
Fan
Package Includes:
SMART1000RMXL2U UPS system, PowerAlert software with USB, serial/EPO cable, 4 post rackmount installation kit and instruction manual