Utility/work truck inverter/charger is the quiet alternative to gas generators with no fumes, fuel or noise. It provides equipment with utility or generator supplied AC electricity filtered through premium ISOBAR surge protection. This DC-to-AC inverter with automatic line to battery transfer and integrated charging system serves as an extended run UPS, standalone power source or an automotive inverter suitable for rugged work site applications. It supplies up to 1250W of continuous 120Vac power from any 12Vdc battery or automotive DC source. OverPower inverter output feature temporarily provides up to 150% of the continuous output for 1 to 60 minutes and DoubleBoost inverter output feature delivers up to 200% of continuous output for up to 10s providing the extra power needed to start heavy-duty tools and motorized equipment. When AC cable is connected to live wall socket, commercial power passes through to connected equipment and the battery set is recharged via 3-stage selectable 10/40A charging system. In UPS mode, the APS system responds to blackouts and voltage fluctuations with a near instantaneous automatic transfer to battery derived AC output. A set of high current DC input terminals is included for simple installation. Reliable large transformer design, with frequency control, powers resistive electronic loads or large inductive motors, compressors and other devices with high current needs on start-up. Included is the APSRM4 wired remote power switch with full status LED’s which provides remote power inverter on/off switching and continuous status information. The UT1250UL supports an unlimited amount of runtime with user-supplied batteries. Versatile inverter/charger system with auto-transfer switching serves as an automotive inverter for utility work trucks, conversion vans, fleet service vehicles, standalone power source for off grid, alternative energy or export applications, emergency home power applications such as sump pumps, and as an uninterruptible power supply (UPS) for items compatible with 16.6ms transfer time.
DoubleBoost inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10s
3-stage, selectable 10/40A battery charger with adjustable settings for wet/gel battery types
2 NEMA 5-15R GFCI protected outlets pass 120V line power or inverter output through to connected equipment
3-position operating mode switch supports auto mode to enable automatic transfer between DC and AC modes
Set of 6 front panel LEDs display continuous status
Automatic overload and thermal shutoff
Front panel connector enables remote off/on switching with included APSRM4 remote
Load-sensing control dial enables adjustable load threshold required to automatically turn the inverter on and off in DC mode as load conditions change
Includes battery temperature sensor with 20ft cable to prolong battery life by adjusting the charge level based on battery temperature
Warranty - Yes
UL Rated - Yes
Spec Sheet available - Yes
Number of Outlets:
2
UL Rated:
Yes
AC Voltage:
120 Volts
DC Voltage:
12 Volts
Depth:
9 in
Height:
7 in
Width:
8.75 in
Product Weight:
23.20 lbs
Shipping Weight:
24.80 lbs
Warranty (Length/Type):
30-month Limited
Frequency Compatibility:
60 Hz
Continuous Output Capacity:
1250 W
Peak Output Capacity:
2500 W
Output Nominal Voltage:
120 V
Overload Protection:
Includes 10A input breaker dedicated to the charging system and 12A output breaker for AC output loads
Outlet quantity/type:
2 AC outlets
DC Maximum Input Full Continuous Load:
127 A (at 12Vdc)
AC Maximum Input:
20 A (at 120Vac)
DC Input Connection Type:
Set of 2 DC bolt-down terminals
AC Input Connection Type:
NEMA 5-15R GFCI input plug
DC Battery System Voltage:
12 VDC
Battery Recharge Rate:
10/40 A (selectable)
Cooling Method:
Multi-speed fan
Construction:
Polycarbonate
Relative Humidity:
0 to 95 % (non-condensing)
Package Includes:
UT1250UL inverter/charger, APSRM4 remote, remote battery temperature sensor cable, instruction manual, warranty information