Digital loudspeaker management system is compact and powerful DSP based 2-in 6-out audio processing unit, ideally suited to live sound and fixed installation applications. It is designed for use with Turbosound loudspeakers and associated bass enclosures and subwoofers. It combines functions of multiple conventional products in compact 1U high, 19-inch high rack unit. It provides tailored equalization and crossover functions specific to Turbosound loudspeaker systems. To achieve this, it provides two inputs and six outputs, configured by factory presets, in addition to total of 40 user-defined presets to enable use with variety of loudspeakers. High performance limiters, delays (up to 400ms input, 80ms output), equalization, gain, polarity and crossover filter controls are accessible to user in order to match specific operating environments. It provides exceptional audio quality through use of carefully optimized processing and high performance converters for better than 111dB of dynamic range, 96kHz sampling rate and minimal filtering. It employs audio-grade capacitors in the analogue signal path for true audiophile performance and superior accuracy. It features LF shelving filters to allow adjustment of response in order to match variations of acoustic conditions such as half space environments like floor monitor applications or for close coupling of loudspeaker arrays. Input delays of up to 400ms and output delays of up to 80ms can be set up on each output (mono) or pair of outputs (stereo) with fine resolution of 21 steps to ensure perfect driver alignment.
2-in, 6-out loudspeaker management
24 bit 96kHz DSP
40 user-defined presets
Switching power supply
Back-lit LCD display
1U, 19-inch rack mounting
Electronically balanced inputs and outputs
Parametric EQ and delays
High performance limiters with variable attack and release times
Switching power supply automatically adapts to mains voltage from 85 to 240V
Superior audio quality
Applications includes concert touring and fixed installations
Amplifier Type - Power Amplifier
Warranty - Yes
Amplifier Signal Type - Audio
Spec Sheet available - Yes
Maximum Input Level:
+20 dBu
Minimum Load:
600 ohms
Maximum Output Level:
+20 dBu (600 ohms load)
Sample Rate:
96 kHz
Frequency Response:
10Hz to 40kHz (±1dB), 10Hz to 20kHz (±0.25dB) (filters disabled)
Dynamic Range:
>111dB (A weighted), >108dB (un-weighted) (22kHz bandwidth)
Gain:
+15 to -30 dB (0.2dB steps)
Output CH Source:
Input A, Input B and SUM
HP Filtering Frequency:
Off, 10Hz to 25.4kHz and off, 1/36 octave steps
LP Filtering Freq:
10Hz to 25.4kHz and off, 1/36 octave steps
Maximum Input Delay:
400 ms
Maximum Output Delay:
80 ms
Limiter:
High performance limiter, adjustable threshold in 0.2dB steps, automatic time constants
Eq Frequency:
10Hz to 25kHz (1/36 octave steps)
Eq Gain:
+15 to -15 dB (0.2dB steps)
EQ width:
5.0 to 0.1 octave bandwidth, 1/36 octave steps
Audio Inputs:
3-pin female XLR
Audio Outputs:
3-pin male XLR
Serial Comms:
9-pin female D type
Network Comms:
Future option on RJ45 (XLR chassis type)
Power Connector:
3-pin IEC
Mains Power:
Universal switch-mode PSU, 85v to 240v AC, 50 to 60Hz
Consumption:
<25 Watt
Warranty (Length/Type):
2 Years
Depth:
10 in
Height:
1.75 in
Width:
19 in
Product Weight:
5.95 lbs
Number of Inputs:
2
Number of Outputs:
6
Total Harmonic Distortion + Noise (THD+N):
0.01 %
Rack Units (Height):
1
Input Impedance:
1000 ohm
Output Impedance:
100 ohm
LMS-D24
- 2-in 4-out Digital Loudspeaker Management System
RACKDP-50
- 4-channel Class D Power Amplifier with 5000W Output Power